VX / VY Flash ECU - Simulating running conditions on bench?

Information and discussion of EFI hardware and specifications
Post Reply
User avatar
The1
Posts: 4810
Joined: Mon Jan 04, 2010 10:23 am

Re: VX / VY Flash ECU - Simulating running conditions on bench?

Post by The1 »

my house is a mess so im missing gear atm, needed something to test with found a mega 2560, here's some dirty code i knocked up between myself and chatgpt, 18x 3x REFHI and a button to switch 1000rpm increments.
Attachments
18x3xref.zip
(1.94 KiB) Downloaded 95 times
Top
User avatar
Chr0m3
Posts: 72
Joined: Tue Aug 08, 2017 4:25 pm
cars: 2004 V6 VY Series 2
Contact:
Contact Chr0m3

Re: VX / VY Flash ECU - Simulating running conditions on bench?

Post by Chr0m3 »

The1 wrote: ↑Sat Jan 11, 2025 4:06 pm my house is a mess so im missing gear atm, needed something to test with found a mega 2560, here's some dirty code i knocked up between myself and chatgpt, 18x 3x REFHI and a button to switch 1000rpm increments.
Thanks, got this working a while ago turned out to be an issue with scope I think, used an Arduino and was all good.
Top
User avatar
The1
Posts: 4810
Joined: Mon Jan 04, 2010 10:23 am

Re: VX / VY Flash ECU - Simulating running conditions on bench?

Post by The1 »

Just an update to the code above, appears that Arduino signal is inverted, So that is fixed, it's as close as you'l get to the real 18x 3x and REF Hi signal i think, i included a button to toggle rpm's, i have been cross referencing 3x and Ref Hi in car with a scope to this playing with dwell times on bench. Let me know if im wrong. :lol:
Top
Post Reply

Return to “Hardware”