e38 bin and XDF files

[DodgeZ]

Where is the best place to look for them? I am not having much luck finding them.

[ironduke]

Depending on what you need universal patcher has some tables and switches worked out, my favorite is the dod disable switch..

Did you have any luck with U-link getting it to read and write?

[DodgeZ]

Looks like you saw the thread over there. IDK not maybe I broke the u-link. I think there is a self test I need to try to confirm. Reading that e38 should be easy verse these 3d print pogo pins jig.

My dev guy is going to work on BCM hammer tonight so I'll be playing around with stuff with him. I see the update on pulling the jumper. I'll give that a try.

From the HP Tuners guys it sounds like the 2010 vette is the better OS to start off with. I have no idea which OS is the most supported on UP though. I can even find bin files to play with

[Brian_Griffin]

google "Tunerpro bin files" you'll find some E38 bins,that I posted on another site (not sure if it's cool to post the link)12614088 (4088) OS,is probably the most documented

[DodgeZ]

I tried there, it only shows 3 bins. https://tunerpro.net/download/bins/GM/

[Brian_Griffin]

https://www.gearhead-efi.com/Fuel-Injec ... -Bin-Files

[DodgeZ]

https://www.gearhead-efi.com/Fuel-Injec ... -Bin-Files

Thanks, not much look finding a 2010 vette or camaro bin. I found a 10 truck and van, also a 2009 vette.

[Brian_Griffin]

got this from hptuners website ,so it might already have some mods

[ScottyhsvR98]

Heres one out of my R8 its not stock tho had a bit of a tune put in it.

[ironduke]

Here's a couple.. Go ahead and download it, probably gonna remove it after a day or so just because.. No corvette but I think there is a camaro.

E38 bins.zip

(24.73 MiB) Downloaded 75 times