MALF 55 Question

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Post Reply
Charlescrown
Posts: 1950
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

MALF 55 Question

Post by Charlescrown »

I was just browsing through 11P and have a question on the MALF 55 reference voltages which were obviously selected by VL400 to use in these params. All the other std bin files seem to have 9 volts but for some reasom VL400 chose to use 0.5 volts for the low and 25 volts for the high as well as the number of conversion erros from 90 down to 5. Would this have been done to effectively turn off MALF 55?
Top
Post Reply

Return to “Holden ALDL ECUs”