P12 VATS DELETE
-
darkman5001
- Posts: 252
- Joined: Sat Dec 18, 2021 8:15 am
- cars: 2005 Yukon, 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
P12 VATS DELETE
Does anyone know of a way to turn VATS off on a P12 PCM using Universal Patcher? I know the P12 xml file has not developed any further. I build a 2nd generation Atlas 4.2L I6 for my daughters 2006 Envoy and have it set up on an engine stand. I already ran it pm the stand using the P10, which it ran but had weird issues. I do know for a fact that the Atlas 4.2L I6 2nd generation has a redesigned head and a different valve cover. I also know that the VVT Actuator Cam Gear and the cam sensor are different on the 2nd generation from the first-generation Atlas 4.2L I6. So now I need to run it using the P12 yet VATS and setting the PRNDL to NOT PRESENT are my primary issues. I can live with the PRNDL issue if have to, but the VATS issue is going to be a real pain in my ass. I would appreciate any help that anyone can off. Thank you in advance.
-
antus
- Site Admin
- Posts: 9031
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: P12 VATS DELETE
What is the OSID?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
darkman5001
- Posts: 252
- Joined: Sat Dec 18, 2021 8:15 am
- cars: 2005 Yukon, 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
Re: P12 VATS DELETE
- Attachments
-
- Test Stand P12 Read.bin
- (1 MiB) Downloaded 26 times
-
antus
- Site Admin
- Posts: 9031
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: P12 VATS DELETE
Try these. The first has VATS Disabled 0x20989 00->01. The second has that as well as VATS Fail Diagnostic Disabled 0x20961 01->00. Both have checksums updated. I am not sure if you need VATs diagnostic disabled as well or not. There is a third VATS mode which allows fail enable as well. If its still not working I'll add that too (its 0x20987 00->01).
- Attachments
-
- Test Stand P12 Read_VATS_Disabled.bin
- (1 MiB) Downloaded 29 times
-
- Test Stand P12 Read_VATS_Disabled_VATS_Fail_Diagnostic_Disabled.bin
- (1 MiB) Downloaded 29 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
darkman5001
- Posts: 252
- Joined: Sat Dec 18, 2021 8:15 am
- cars: 2005 Yukon, 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
Re: P12 VATS DELETE
Thank you, Antus. I appreciate you very much. I'll give it a shot and let you know what happens.antus wrote: ↑Sat Jun 14, 2025 1:17 pm Try these. The first has VATS Disabled 0x20989 00->01. The second has that as well as VATS Fail Diagnostic Disabled 0x20961 01->00. Both have checksums updated. I am not sure if you need VATs diagnostic disabled as well or not. There is a third VATS mode which allows fail enable as well. If its still not working I'll add that too (its 0x20987 00->01).
-
antus
- Site Admin
- Posts: 9031
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: P12 VATS DELETE
The part of your question about PNRDL NOT PRESENT, what sort of setting is that? Is that like setting trans type to manual? Or is that a DTC you need to set to not trigger MIL? And if so, what code? Some type of shift module?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
darkman5001
- Posts: 252
- Joined: Sat Dec 18, 2021 8:15 am
- cars: 2005 Yukon, 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
Re: P12 VATS DELETE
The VATS off worked perfectly Antus. Thank you. It turns out I don't need a PRNDL delete afterall.
The PRNDL NOT PRESENT setting turns off the neutral safety requirement to start. This is a setting available to all the GM PCMs I have used with Jet DST Tuner.
Sadly Jet Tuners does not support the P12 PCM.