Modify E40 OS Routine - CAN

Disassembly, Reassembly, Tools and devleopment. Going deep with Hardware and Software.
User avatar
Tre-Cool
Posts: 544
Joined: Tue Oct 16, 2012 2:17 am
cars: VY SS UTE, VX Drag Car
Location: Perth

Re: Modify E40 OS Routine - CAN

Post by Tre-Cool »

Made another video showing all the factory functions working & car shifting etc. Won't be a pro youtuber anytime soon.

https://youtu.be/3VSCW4NDqfc
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: Modify E40 OS Routine - CAN

Post by antus »

Good to see. It's working so well someone who does not understand what you have done and what it took to do it might think it was totally stock!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
MPC001
Posts: 188
Joined: Sat May 05, 2018 11:41 am

Re: Modify E40 OS Routine - CAN

Post by MPC001 »

Tazzi wrote: Sat Nov 15, 2025 2:27 am
MPC001 wrote: Fri Nov 14, 2025 9:11 pm 👍
Impressive that rev matching works day 1 along with timing based torque reduction on shifts.

Sounds like E40 was almost A6 ready before the E38! Some cubic tenacity & brilliant tweaking to get it done.

Ground breaking world first! Congratulations!

A10 behind E40 next? 😃😎
I think it’s been in all controllers for a long time. It’s all about making sure all the correct data is being transmitted to/from the ECM/TCM, and ensuring it’s obviously enabled too.

I’d guess if some of the data is omitted, then it automatically disables the feature.
Yeah I guess with circa 4-5 year development cycles there is a need to continuously evolve & test the code base against future product development targets so it's not a last minute thing.

Kudos again for getting this mobile. Excellence!
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: Modify E40 OS Routine - CAN

Post by antus »

Not just that, but sometimes decisions are made last minute. The spec may have been to support that trans/features, then 3 months before release they might have decided the software is not quite ready, testing isn't complete, or it'll cost to much to offer that combination in that market and it gets cancelled. But the code stays to keep the option open for another market or time or later product. Sometimes features are a work of passion by the developers/engineers, sometimes it's a corporate decision. I've never worked in GM, I know that from other industries i've worked in but I would be surprised if it did not hold true here as well.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
MPC001
Posts: 188
Joined: Sat May 05, 2018 11:41 am

Re: Modify E40 OS Routine - CAN

Post by MPC001 »

You're certainly right about labors of love. Trumped the oversight of the bean counters every time at Holden, mostly as it was in your own time 😁😉.
User avatar
Tre-Cool
Posts: 544
Joined: Tue Oct 16, 2012 2:17 am
cars: VY SS UTE, VX Drag Car
Location: Perth

Re: Modify E40 OS Routine - CAN

Post by Tre-Cool »

So not directly related to the E40/6L setup, but knowledge from this helped fix an issue i was having trying to flash with the link ecu & 6l80 combo.

Found that the link ecu was sending the same info all the time instead of only when the engine was running which was preventing the tuning tools from being able to read & flash. Got firmware updated and all good.
hjtrbo
Posts: 353
Joined: Tue Jul 06, 2021 8:57 am
cars: VF2 R8 LSA
FG XR6T
HJ Ute w/RB25DET

Re: Modify E40 OS Routine - CAN

Post by hjtrbo »

Perfect, good find!
User avatar
Knackersjewels
Posts: 156
Joined: Thu May 05, 2022 10:24 am
cars: Stock VZ SV6
Cammed VZ SV6 (sson to be 6L45 converted and twin turbo)
VY SS L98 ute
VZ V6 AWD One Tonner
Location: Maffra, Vic

Re: Modify E40 OS Routine - CAN

Post by Knackersjewels »

Hey Tre, is it generic CAN stuff that needs to be changed, or is it specific to each OS? I'm needing some help getting a E55 VZ V6 to talk to a 6L80 tcm. If you can give me some pointers, I'd be eternally grateful. Even like how you've got wiring done for reverse lights
User avatar
Tre-Cool
Posts: 544
Joined: Tue Oct 16, 2012 2:17 am
cars: VY SS UTE, VX Drag Car
Location: Perth

Re: Modify E40 OS Routine - CAN

Post by Tre-Cool »

Knackersjewels wrote: Sat Dec 13, 2025 11:01 am Hey Tre, is it generic CAN stuff that needs to be changed, or is it specific to each OS? I'm needing some help getting a E55 VZ V6 to talk to a 6L80 tcm. If you can give me some pointers, I'd be eternally grateful. Even like how you've got wiring done for reverse lights
The VZ Pim expects the transmission gear to be broadcast on can ID320 from tcm, with the pim programmed as a 5l40 it will then gnd the reverse output pin 86. so you use that as your relay gnd. 85/30 get switched 12v. 87 is your power to reverse lights.
User avatar
Knackersjewels
Posts: 156
Joined: Thu May 05, 2022 10:24 am
cars: Stock VZ SV6
Cammed VZ SV6 (sson to be 6L45 converted and twin turbo)
VY SS L98 ute
VZ V6 AWD One Tonner
Location: Maffra, Vic

Re: Modify E40 OS Routine - CAN

Post by Knackersjewels »

So the pim takes the tcm data no dramas? awesome