Hi guys
Just wondering if anyone can help me out with what sensors and switches are required to get the cruise control to work on an. E38 ecu from a 2006 vz ss. This unit has been transplanted into a 60 series land cruiser
Everything else is functioning fine just the cruise control isn’t. I’ve got the pim fitted and it’s a paired unit with the ecu the cruise buttons are also fitted but not sure if the pim needs a positive or a ground from each button
Has 1 clutch switch fitted. If anyone knows exactly what sensors and switches are required and complete wiring diagrams for them would be great
Thanks
Darren
2006 vz e38 cruise control wiring
-
Dazza92VP
- Posts: 608
- Joined: Sat Jun 05, 2010 11:59 pm
- cars: 92 VP V8 Wagon
- Location: Perth
-
Tre-Cool
- Posts: 533
- Joined: Tue Oct 16, 2012 2:17 am
- cars: VY SS UTE, VX Drag Car
- Location: Perth
Re: 2006 vz e38 cruise control wiring
manual tune will likely want to see clutch pedal along with the brake input activated before cruise will engage.
Pretty sure cruise stalk will just be pull to gnd on each input. I've not gone so far as to wire mine in, but pretty sure the older vt-vy were gnd inputs on the bcm, so i cant see them changing.
Pretty sure cruise stalk will just be pull to gnd on each input. I've not gone so far as to wire mine in, but pretty sure the older vt-vy were gnd inputs on the bcm, so i cant see them changing.