Can VAG DataStream Display Program
-
Lowlyfe1
- Posts: 50
- Joined: Wed Dec 11, 2019 9:43 pm
- cars: 2002 silverado 5.3, 88 300 zx
Can VAG DataStream Display Program
Made this for vag, but can be ported over to anything else really as long as you know the CAN IDs. Shows wideband lambda, boost, intake air temp, coolant temp, RPM, Throttle percentage and engine torque output. Fast, no need to login to any with any protocol, as soon as it Starts seeing a data steam it displays info. Made a Python based viewer, need to have python installed in order to use or use the compiled version in the dist folder. Hardware side of it is an arduino nano and a SPI CAN Bus module off ebay for like 6 bucks Pinout is easy, just look at the arduino sketch. Currently working on making this work with a smaller 5 inch lcd display, the whole point of this project is to make a simple gauge cluster display for less than 50 USD that can be used in swap cars. Project file attached.
You do not have the required permissions to view the files attached to this post.
-
Lowlyfe1
- Posts: 50
- Joined: Wed Dec 11, 2019 9:43 pm
- cars: 2002 silverado 5.3, 88 300 zx
Re: Can VAG DataStream Display Program
Updated the project Sweeping gauges, Alarms, datalogging complexly
new front end
You do not have the required permissions to view the files attached to this post.