M3.8.3 / M5.9.2 Flashing Utility
-
Lowlyfe1
- Posts: 50
- Joined: Wed Dec 11, 2019 9:43 pm
- cars: 2002 silverado 5.3, 88 300 zx
M3.8.3 / M5.9.2 Flashing Utility
Currently only configured for write only (read takes about 25 min and is padded with a bunch of garbage and is not a complete read of the Flash chip only cal) so currently I have writing active. Works with standard K kine Ft232rl cable. Really easy to use, configured for cable auto detection, no need to select comport. Attached are the required pin outs for port and bench flashing
You do not have the required permissions to view the files attached to this post.
-
antus
- Site Admin
- Posts: 10013
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: M3.8.3 / M5.9.2 Flashing Utility
Thanks for shareing!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396