0411 - Cannot Read Entire PCM

[m002922]

I can read a second PCM using the same computer and OBDLink SX, no issues.

When I try to read the PCM I'm actually using in my vehicle (which doesn't seem to have any issues to speak of), I get these errors.

Anyone have any idea what is going on with this?

The Error file can be found here:

https://drive.google.com/file/d/1EArm25 ... drive_link

Here is the text:

[06:18:58:484] PCM Hammer 021
[06:18:58:484] Thursday, January 15 2026 @06:18:58:48
[06:18:58:484] ElmDevice initialization starting.
[06:18:58:579] TX:
[06:18:58:579] TX: AT Z
[06:18:58:635] Loaded start.txt from network.
[06:18:58:635] Loaded credits.html from network.
[06:18:58:635] Loaded help.html from network.
[06:18:59:456] AT Z ELM327 v1.4b
[06:18:59:456] TX: AT E0
[06:18:59:456] Thanks for using PCM Hammer.
[06:18:59:595] AT E0 OK
[06:18:59:595] TX: AT S0
[06:18:59:600] OK
[06:18:59:600] TX: AT RV
[06:18:59:614] Voltage: 12.0V
[06:18:59:614] TX: AT I
[06:18:59:630] Elm ID: ELM327 v1.4b
[06:18:59:630] Initializing PcmHacking.AllProDeviceImplementation
[06:18:59:630] TX: AT #1
[06:18:59:646] This is not an AllPro device.
[06:18:59:646] Determining whether PcmHacking.ScanToolDeviceImplementation is connected.
[06:18:59:646] TX: ST I
[06:18:59:663] ScanTool device ID: STN1130 v5.8.1
[06:18:59:665] TX: STPTO 3000
[06:18:59:679] OK
[06:18:59:679] TX: AT AL
[06:18:59:695] OK
[06:18:59:695] TX: AT SP2
[06:18:59:711] OK
[06:18:59:711] TX: AT DP
[06:18:59:727] SAE J1850 VPW
[06:18:59:727] TX: AT AR
[06:18:59:743] OK
[06:18:59:743] TX: AT AT0
[06:18:59:759] OK
[06:18:59:759] TX: AT SR F0
[06:18:59:775] OK
[06:18:59:775] TX: AT H1
[06:18:59:792] OK
[06:18:59:792] TX: AT ST 20
[06:18:59:808] OK
[06:19:09:122] Will save to C:\Users\dhoff\OneDrive\Documents\1.bin
[06:19:11:312] Querying operating system of current PCM.
[06:19:11:323] Setting timeout for ReadProperty, 25 ms.
[06:19:11:327] TX: STPTO 25
[06:19:11:333] OK
[06:19:11:333] TX: STPX H:6C10F0, R:1, D:3C0A
[06:19:11:429] RX: 6C F0 10 7C 0A 00 13 6C AA
[06:19:11:429] OSID: 1273002
[06:19:11:429] Suppressing VPW chatter.
[06:19:11:429] TX: STPX H:6CFEF0, R:1, D:2800
[06:19:11:478] RX: 6C F0 10 68 00
[06:19:11:478] Sending 'test device present' notification.
[06:19:11:478] Setting timeout for Minimum, 0 ms.
[06:19:11:478] TX: STPTO 0
[06:19:11:478] OK
[06:19:11:494] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:11:494] Empty response to STPX with data. OK.
[06:19:11:510] Setting timeout for ReadProperty, 25 ms.
[06:19:11:510] TX: STPTO 25
[06:19:11:514] OK
[06:19:11:526] Ignoring chatter: 6C F0 10 68 00
[06:19:11:527] Sending seed request.
[06:19:11:530] TX: STPX H:6C10F0, R:1, D:2701
[06:19:11:573] RX: 6C F0 10 67 01 5C 33
[06:19:11:573] Parsing seed value.
[06:19:11:577] Sending unlock request (5C33, 5FF1)
[06:19:11:577] TX: STPX H:6C10F0, R:1, D:27025FF1
[06:19:11:621] RX: 6C F0 10 67 02 34
[06:19:11:621] Unlock succeeded.
[06:19:11:627] Sending 'test device present' notification.
[06:19:11:627] Setting timeout for Minimum, 0 ms.
[06:19:11:627] TX: STPTO 0
[06:19:11:637] OK
[06:19:11:637] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:11:654] Empty response to STPX with data. OK.
[06:19:11:654] Setting timeout for ReadProperty, 25 ms.
[06:19:11:654] TX: STPTO 25
[06:19:11:669] OK
[06:19:11:669] This interface does not support VPW 4x
[06:19:11:669] Sending 'test device present' notification.
[06:19:11:669] Setting timeout for Minimum, 0 ms.
[06:19:11:669] TX: STPTO 0
[06:19:11:685] OK
[06:19:11:685] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:11:701] Empty response to STPX with data. OK.
[06:19:11:701] Setting timeout for ReadProperty, 25 ms.
[06:19:11:701] TX: STPTO 25
[06:19:11:717] OK
[06:19:11:717] Loaded C:\Users\dhoff\Downloads\PcmHammer021\PcmHammer021\Kernel-P01.bin
[06:19:11:717] Sending 'test device present' notification.
[06:19:11:717] Setting timeout for Minimum, 0 ms.
[06:19:11:717] TX: STPTO 0
[06:19:11:733] OK
[06:19:11:733] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:11:749] Empty response to STPX with data. OK.
[06:19:11:749] Setting timeout for ReadProperty, 25 ms.
[06:19:11:749] TX: STPTO 25
[06:19:11:765] OK
[06:19:11:768] Sending upload request for kernel size 7890, loadaddress FF8000
[06:19:11:768] TX: STPX H:6C10F0, R:1, D:34001000FF8000
[06:19:11:797] RX: 6C F0 10 74 00 44
[06:19:11:797] Going to load a 7890 byte kernel to 0xFF8000
[06:19:11:797] Setting timeout for SendKernel, 50 ms.
[06:19:11:797] TX: STPTO 50
[06:19:11:813] OK
[06:19:11:813] Sending end block payload with offset 0x1C00, start address 0xFF9C00, length 0x2D2.
[06:19:11:813] Sending 'test device present' notification.
[06:19:11:813] Setting timeout for Minimum, 0 ms.
[06:19:11:813] TX: STPTO 0
[06:19:11:830] OK
[06:19:11:830] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:11:846] Empty response to STPX with data. OK.
[06:19:11:846] Setting timeout for SendKernel, 50 ms.
[06:19:11:846] TX: STPTO 50
[06:19:11:862] OK
[06:19:11:926] TX: STPX H:6D10F0, R:1, L:731
[06:19:11:942] TX: 360002D2FF9C0030BC5555203C00000AAA204030BC9090428020403F50000A700220403F5000084280302F000A2200484142414280302F0008240184802F4200044280204030BCFFFF203C00FFFA4E204030BC1060202F0004241F508F4E75518F518F426F000E2F6F00140006203C00FFFA4E204030BC7060203C00000AAA204030BCAAAA203C00000554204030BC5555203C00000AAA204030BC8080203C00000AAA204030BCAAAA203C00000554204030BC5555202F0006204030BC3030426F0004426F000242AF000A6058202F0006204030103200024100403F4100044EB900FF8BDC202F0006204030103200024100403F410002302F0002B06F00046602602C202F0006204030103200024100203E814A57660652AF000A60083F7C00A0000E600A0CAF0127FFFF000A6F9E0C6F00A0000E663A202F0006204030103200024100403F410004202F0006204030103200024100403F410002302F0002B06F000467083F7C00B0000E6004426F000E202F0006204030BCF0F0202F0006204030BCF0F0203C00FFFA4E204030BC1060302F000E1000508F508F4E754FEFFFE0422F00152F6F002C00102F6F0028000C42AF001C600000E6202F001CD080222F000CD2802F410008202F001CD080D0AF001020403F5000064AAF0030663A203C00FFFA4E204030BC7060203C00000AAA204030BCAAAA203C00000554204030BC5555203C00000AAA204030BCA0A0202F0008204030AF0006422F001B42AF001660344EB900FF8BDC4AAF0030660A202F0008204030106004302F00063F400004302F0006B06F000466081F7C0001001B600E52AF00160CAF00000FFF00166FC24A2F001B66321F7CFFAA00154AAF00306620202F0008204030BCF0F0202F0008204030BCF0F0203C00FFFA4E204030BC1060102F0015603A52AF001C202F0024E288B0AF001C6200FF104AAF003066202EAF00282017204030BCF0F02017204030BCF0F0203C00FFFA4E204030BC106042004FEF00204E75BFA9
[06:19:12:678] RX: 6D F0 10 76 00 73
[06:19:12:678] Found response, Success
[06:19:12:678] Kernel upload 9% complete.
[06:19:12:678] Sending block with offset 0x001800, start address 0xFF9800, length 0x0400.
[06:19:12:742] TX: STPX H:6D10F0, R:1, L:1033
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
[06:19:13:798] RX: 6D F0 10 76 00 73
[06:19:13:798] Found response, Success
[06:19:13:798] Kernel upload 22% complete.
[06:19:13:798] Sending block with offset 0x001400, start address 0xFF9400, length 0x0400.
[06:19:13:862] TX: STPX H:6D10F0, R:1, L:1033
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
[06:19:14:902] RX: 6D F0 10 76 00 73
[06:19:14:902] Found response, Success
[06:19:14:902] Kernel upload 35% complete.
[06:19:14:906] Sending block with offset 0x001000, start address 0xFF9000, length 0x0400.
[06:19:14:906] Sending 'test device present' notification.
[06:19:14:906] Setting timeout for Minimum, 0 ms.
[06:19:14:906] TX: STPTO 0
[06:19:14:918] OK
[06:19:14:918] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:14:934] Empty response to STPX with data. OK.
[06:19:14:934] Setting timeout for SendKernel, 50 ms.
[06:19:14:934] TX: STPTO 50
[06:19:14:950] OK
[06:19:15:013] TX: STPX H:6D10F0, R:1, L:1033
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
[06:19:16:055] RX: 6D F0 10 76 00 73
[06:19:16:055] Found response, Success
[06:19:16:055] Kernel upload 48% complete.
[06:19:16:055] Sending block with offset 0x000C00, start address 0xFF8C00, length 0x0400.
[06:19:16:119] TX: STPX H:6D10F0, R:1, L:1033
[06:19:16:135] TX: 36000400FF8C00204112100A01FF80204010814E754E714E714E714E714E75518F42AF00046026429760124E714E714E714E714E714E714E714E7152972017B0AF00106DE64EBAFF9C52AF0004202F0004B0AF000C6DD0508F4E7548780005487827104EBAFFBA508F4E7548780032487800014EBAFFAA508F4E75202F0004487800FA2F004EBAFF98508F4E75598F2F0242AF0004604C226F000422094C3C1C0010624DD3EA802209D281938124009481220220412008E58820402008EB889088D081E588220992804A8166044EBAFF14202F0004068000FF9ED62040421052AF00040CAF0000101300046FAA241F588F4E75598F4297600E2017068000FFAEEA2040421052977063B0976CEC588F4E75518F202F000C1E80203C00FFF60E204010101200020100031F410007422F0006603A102F0006120052011F41000642AF000260084EBAFECE52AF00027031B0AF00026CF04EBAFE8C203C00FFF60E204010101200020100031F4100070C2F0002000767080C2F0003000766080C2FFFF9000663AE203C00FFF60D20401097508F4E754FEFFFEC202F001C3F4000024EBAFE427001C0AF00204A80670C203C00FFF60C204010BC00147004C0AF00204A806708302F000253406004302F00023F4000044EBA044E3F400010426F000E60424280302F000ED0AF0018204010101000024000FFD16F00104280302F000ED0AF00182040101010000280000000FF2F004EBAFEFE588F302F000E320052413F41000E302F0004B06F000E62B47008C0AF00204A8067584280302F000ED0AF0018204010101000024000FFD16F00104280302F000ED0AF00182040101010000280000000FF2F004EBAFEA8588F302F0010E048100010000280000000FF2F004EBAFE90588F302F00101F40001260104280302F000ED0AF001820401F5000127004C0AF00204A8067000094203C00FFF60C204010BC000C203C00FFF60D204010AF00124EBAFD50203C00FFF60C204010BC0003203C00FFF60D20404210203C00FFF60E204010101200020100031F41001342AF000A603652AF000A42AF0006600C4EBAFCE04EBAFD0E52AF00067063B0AF00066CEC4EBAFCCC203C00FFF60E204010101200020100031F4100134A2F0013670A0CAF000001F3000A6FBA4FEF00144E75518F598F4EBAFC9A42AF000842AF000460024E714EBAFC8A52AF00080CAF00030000000863064280600001100CAF0000101400046F12202F0014204010BCFFEE202F0004600000F4203C00FFF60E20401010EA081F4000034280102F00037207B28065AE303B0A064EFB000200C80010001000B80010005C005C005C202F0004220052812F410004223C00FFF60F20411210118109B000FF9ED6203C00FFF60E20401010EA081F4000030C2F0001000367CA0C2F0002000367C20C2F0004000367BA42AF27E0
[06:19:17:160] RX: 6D F0 10 76 00 73
[06:19:17:160] Found response, Success
[06:19:17:160] Kernel upload 61% complete.
[06:19:17:160] Sending block with offset 0x000800, start address 0xFF8800, length 0x0400.
[06:19:17:160] Sending 'test device present' notification.
[06:19:17:160] Setting timeout for Minimum, 0 ms.
[06:19:17:160] TX: STPTO 0
[06:19:17:176] OK
[06:19:17:176] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:17:191] Empty response to STPX with data. OK.
[06:19:17:191] Setting timeout for SendKernel, 50 ms.
[06:19:17:191] TX: STPTO 50
[06:19:17:208] OK
[06:19:17:272] TX: STPX H:6D10F0, R:1, L:1033
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
[06:19:18:312] RX: 6D F0 10 76 00 73
[06:19:18:312] Found response, Success
[06:19:18:312] Kernel upload 74% complete.
[06:19:18:312] Sending block with offset 0x000400, start address 0xFF8400, length 0x0400.
[06:19:18:376] TX: STPX H:6D10F0, R:1, L:1033
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
[06:19:19:400] RX: 6D F0 10 76 00 73
[06:19:19:400] Found response, Success
[06:19:19:400] Kernel upload 87% complete.
[06:19:19:400] Sending block with offset 0x000000, start address 0xFF8000, length 0x0400.
[06:19:19:400] Sending 'test device present' notification.
[06:19:19:400] Setting timeout for Minimum, 0 ms.
[06:19:19:400] TX: STPTO 0
[06:19:19:416] OK
[06:19:19:416] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:19:432] Empty response to STPX with data. OK.
[06:19:19:432] Setting timeout for SendKernel, 50 ms.
[06:19:19:432] TX: STPTO 50
[06:19:19:448] OK
[06:19:19:513] TX: STPX H:6D10F0, R:1, L:1033
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
[06:19:20:553] RX: 6D F0 10 76 00 73
[06:19:20:553] Found response, Success
[06:19:20:553] Kernel upload 100% complete.
[06:19:20:559] TX: STPX H:6C10F0, R:1, D:3D00
[06:19:20:601] RX: 6D F0 10 76 00
[06:19:20:713] TX: STPX H:6C10F0, R:1, D:3D00
[06:19:21:834] Timeout during receive.
[06:19:21:946] TX: STPX H:6C10F0, R:1, D:3D00
[06:19:21:978] RX: 6C F0 10 7D 00 01 03 05 01
[06:19:21:978] Kernel Version: 01030501
[06:19:21:981] kernel uploaded to PCM succesfully. Requesting data...
[06:19:21:981] Sending 'test device present' notification.
[06:19:21:981] Setting timeout for Minimum, 0 ms.
[06:19:21:981] TX: STPTO 0
[06:19:21:994] OK
[06:19:21:994] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:22:001] Empty response to STPX with data. OK.
[06:19:22:010] Setting timeout for SendKernel, 50 ms.
[06:19:22:010] TX: STPTO 50
[06:19:22:026] OK
[06:19:22:026] Setting timeout for ReadProperty, 25 ms.
[06:19:22:026] TX: STPTO 25
[06:19:22:042] OK
[06:19:22:042] TX: STPX H:6C10F0, R:1, D:3D01
[06:19:22:074] RX: 6C F0 10 7D 01 00 89 44 71
[06:19:22:074] Flash chip: Intel 28F400B, 512kb
[06:19:22:074] Setting timeout for ReadMemoryBlock, 250 ms.
[06:19:22:074] TX: STPTO 250
[06:19:22:090] OK
[06:19:22:090] Read complete.
[06:19:22:090] All read-request messages succeeded on the first try. You have an excellent connection to the PCM.
[06:19:22:090] We're not sure how much retrying is normal for a read operation on a 0kb PCM.
[06:19:22:090] Please help by sharing your results in the PCM Hammer thread at pcmhacking.net.
[06:19:22:090] Starting verification...
[06:19:22:106] Calculating CRCs from file.
[06:19:22:106] Initializing CRC algorithm on PCM, this will take a minute...
[06:19:22:106] Sending 'test device present' notification.
[06:19:22:106] Setting timeout for Minimum, 0 ms.
[06:19:22:106] TX: STPTO 0
[06:19:22:122] OK
[06:19:22:122] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:22:137] Empty response to STPX with data. OK.
[06:19:22:137] Setting timeout for ReadMemoryBlock, 250 ms.
[06:19:22:137] TX: STPTO 250
[06:19:22:154] OK
[06:19:22:155] TX: STPX H:6C10F0, R:1, D:3D02000000000000
[06:19:22:234] RX: 6C F0 10 7D 02 00 00 00 00 00 00 00 00 00 00
[06:19:22:234] Requesting CRCs from PCM.
[06:19:22:238] Setting timeout for ReadCrc, 100 ms.
[06:19:22:238] TX: STPTO 100
[06:19:22:250] OK
[06:19:22:251] Range File CRC PCM CRC Verdict Purpose
[06:19:22:254] 060000-07FFFF not needed not needed n/a OperatingSystem
[06:19:22:257] 040000-05FFFF not needed not needed n/a OperatingSystem
[06:19:22:263] 020000-03FFFF not needed not needed n/a OperatingSystem
[06:19:22:266] 008000-01FFFF not needed not needed n/a Calibration
[06:19:22:266] 006000-007FFF not needed not needed n/a Parameter
[06:19:22:277] 004000-005FFF not needed not needed n/a Parameter
[06:19:22:284] 000000-003FFF not needed not needed n/a Boot
[06:19:22:291] Sending 'test device present' notification.
[06:19:22:291] Setting timeout for Minimum, 0 ms.
[06:19:22:291] TX: STPTO 0
[06:19:22:297] OK
[06:19:22:298] TX: STPX H:8CFEF0, R:0, D:3F
[06:19:22:313] Empty response to STPX with data. OK.
[06:19:22:313] Setting timeout for ReadCrc, 100 ms.
[06:19:22:315] TX: STPTO 100
[06:19:22:329] OK
[06:19:22:329] The contents of the file match the contents of the PCM.
[06:19:22:329] Halting the kernel.
[06:19:22:329] TX: STPX H:6C10F0, R:1, D:20
[06:19:22:458] Clearing trouble codes.
[06:19:22:458] Setting timeout for Minimum, 0 ms.
[06:19:22:458] TX: STPTO 0
[06:19:22:474] OK
[06:19:22:730] TX: STPX H:686AF0, R:1, D:04
[06:19:22:763] RX: 6C F0 10 60 CC 00 00 0A
[06:19:23:017] TX: STPX H:686AF0, R:1, D:04
[06:19:24:027] Empty response to STPX with data. That's not OK.
[06:19:24:283] TX: STPX H:8CFEF0, R:1, D:14
[06:19:24:299] Unexpected response to STPX with data: STOPPED
[06:19:24:555] TX: STPX H:8CFEF0, R:1, D:14
[06:19:24:556] Unexpected response to STPX with data: ?
[06:19:24:557] Halting the kernel.
[06:19:24:557] TX: STPX H:6C10F0, R:1, D:20
[06:19:24:571] Unexpected response to STPX with data: STOPPED
[06:19:24:571] Clearing trouble codes.
[06:19:24:843] TX: STPX H:686AF0, R:1, D:04
[06:19:25:851] Empty response to STPX with data. That's not OK.
[06:19:26:107] TX: STPX H:686AF0, R:1, D:04
[06:19:26:123] Unexpected response to STPX with data: STOPPED
[06:19:26:380] TX: STPX H:8CFEF0, R:1, D:14
[06:19:26:381] Unexpected response to STPX with data: ?
[06:19:26:635] TX: STPX H:8CFEF0, R:1, D:14
[06:19:26:636] RX: 8C F0 10 54
[06:19:26:636] Elapsed time 00:00:15.0150462
[06:19:26:641] Saving contents to C:\Users\dhoff\OneDrive\Documents\1.bin

[antus]

Its an unsupported custom operating system. Need the very latest test version for that, not generally available yet.

[m002922]

You're saying OS on the PCM is unsupported?

That's interesting, not sure how it would have been updated beyond the other PCM, which I believe is the same vintage. Maybe that's something I did through HP Tuners (not understanding there would be consequences).

I'll look for the newer Version of PCM Hammer that might be able to handle it.

Thank you for the response.

[m002922]

And when you say "custom" - do you know where it came from? Just curious how I managed to do this.

Thank you.

[zack4200]

It's an HP Tuners custom OS.
They're usually set up for speed density instead of MAF, and different map sensors for boost. I've never messed with any HPT stuff so don't really know the specifics of which OSID corresponds to which features, but from what I've seen online their OSID format is usually 127300x.

[m002922]

Interesting, I had no idea about this.

That OS is likely causing issues with my tune as well. Very serendipitous to learn this.

[antus]

This is what I figured out by gathering information about OSIDs from public sources and writing them all side by side. It's not official, so far the pattern fits.

// 0 = 1
// 1 = 2
// 2 = COS type. Have observed 5 = 2 Bar RTT, 6 = 3 Bar Non-RTT, 7 = 1 Bar RTT, 8 = MAF RTT
// 3 = Version number. 1 Appears to have custom keys, 2 and 3 do not.
// 4 = 0
// 5 = 0 for P01, 5 for P59
// 6 = OS variant

[m002922]

Thank you. Very helpful.

[m002922]

Its an unsupported custom operating system. Need the very latest test version for that, not generally available yet.

To make sure I understand what you're saying above, the "latest version" is not the "2.0" preview version put out in February 2025. You're talking about a version that is in the works, correct?

I looked at the Custom OS I installed and I don't think that is my issue, as I seem to have the HP Tuners 1Bar speed density OS - which comports with what you said (and I'm sure saw).

I'm also pretty sure the P0300 code that I've been chasing which led me down this rabbit hole is not related to the PCM being bad (a possibility I previously considered) or the tune (a possibility I also considered). The P0300 is really derivative of 1 cylinder (the #4), and basically disappears above idle and under load.

Given everything else I've eliminated (on the ignition side), I think I probably have an intake leak mainly affecting that cylinder. We'll see.

[antus]

Yes, I need to get better at releases. The other developer. NSFW, released 2.0-preview and Im not across the process to put out another release. A lot of development has gone in to it since 2.0-preview, and I'd actually like to remove that release. But now I think we really need a new update. You can always get the latest development version for github, but the process is designed for developers. Essentially you need a github account, and then you go to 'actions' in the project and when you are logged in, there is a download link to a zip with the latest development version. That is what I am talking about.