Universal Patcher - Trouble loading an e38 bin
-
darkman5001
- Posts: 275
- Joined: Fri Dec 17, 2021 10:15 pm
- cars: 2005 Yukon, 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
Universal Patcher - Trouble loading an e38 bin
I read the flash memory from a 2008 Suburban with E38 using PowerPCM Flasher 0.0.0.6. Tried to load in newest version of Universal Patcher and it does not load properly. None of the information is detected. I 100% know that the file is good from an E38. I have attached this bin. Any ideas?
You do not have the required permissions to view the files attached to this post.
-
ironduke
- Posts: 820
- Joined: Thu Feb 13, 2020 1:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: Universal Patcher - Trouble loading an e38 bin
That bin's engine segment was modified at the end so it's failing auto detect.. If you deselect auto detect and choose E38.xml then open the file it will work..
I know why it was modified and why it was modified the second time, lol..
Dod has been turned off, that's the only thing changed in the engine segment. You can change the end of the files last 2 bytes to ff ff and adjust the cvn and it will work fine.
I know why it was modified and why it was modified the second time, lol..
Dod has been turned off, that's the only thing changed in the engine segment. You can change the end of the files last 2 bytes to ff ff and adjust the cvn and it will work fine.
You do not have the required permissions to view the files attached to this post.
-
darkman5001
- Posts: 275
- Joined: Fri Dec 17, 2021 10:15 pm
- cars: 2005 Yukon, 2004 Suburban, 2001 Tahoe, 2002 Envoy, 2006 Envoy, 2003 Lincoln LS
- Location: New Jersey, USA
Re: Universal Patcher - Trouble loading an e38 bin
Awesome. Thank you Ironduke. Much appreciated.