Hi all, I'm a bit new too this tuning stuff and have installed a aem x-series wideband and lsu4.9 sensor in my exotic and wired my signal wire into the injector voltage mon as suggested by @the1 but for some reason it will not read the right numbers either I've done something wrong or the equation is not right. Cheers
This is a wot pull
Wideband vy ecotec
-
zaccoreo
- Posts: 4
- Joined: Wed Nov 05, 2025 1:00 am
- cars: Vy Commodore
Wideband vy ecotec
You do not have the required permissions to view the files attached to this post.
-
Rhysk94
- Posts: 235
- Joined: Sun Mar 15, 2020 9:25 am
- cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Competition Drift Car
VY V6 L67 Seat Time Drift Car
N80 Toyota Hilux
VZ SS - Location: Perth
Re: Wideband vy ecotec
Need to adjust the equation to suit your exavt wideband sensor/controller
-
Snitz
- Posts: 16
- Joined: Sun Mar 03, 2024 3:54 am
- cars: VN L67 Dirt circuit race car
- Location: Eyre Peninsula, SA
Re: Wideband vy ecotec
Would love a bit more info on doing this..
Currently using an Innovate and logging to Logworks while logging Tunerpro RT through ALDL, then overlaying the two logs into a spreadsheet.
If not mistaken, is pin C12 EGR Pintle pos sensor a solid input pin seeing as I have no EGR?
If there's an easier or better option please enlighten me! Would really like to have everything logging data together and if there's XDF and ADX differences to incorporate the wideband, please share.
Vt Enhanced bin, xdf and adx.. N/A L36 engine, race car.
Currently using an Innovate and logging to Logworks while logging Tunerpro RT through ALDL, then overlaying the two logs into a spreadsheet.
If not mistaken, is pin C12 EGR Pintle pos sensor a solid input pin seeing as I have no EGR?
If there's an easier or better option please enlighten me! Would really like to have everything logging data together and if there's XDF and ADX differences to incorporate the wideband, please share.
Vt Enhanced bin, xdf and adx.. N/A L36 engine, race car.
Snitz
-
jay woo
- Posts: 56
- Joined: Mon Jul 11, 2011 10:42 am
Re: Wideband vy ecotec
What values are in the adx formula that is not working? Which pins are the brown and white wire form the aem connected to?
From the aem document:
0-5V Analog Output
WHITE WIRE = Analog Positive +
BROWN WIRE = Analog Negative -
0-5V Analog Output Scaling Formulas
AFR = (2.3750 * Volts) + 7.3125
Lambda = (0.1621 * Volts) + 0.4990
From the aem document:
0-5V Analog Output
WHITE WIRE = Analog Positive +
BROWN WIRE = Analog Negative -
0-5V Analog Output Scaling Formulas
AFR = (2.3750 * Volts) + 7.3125
Lambda = (0.1621 * Volts) + 0.4990
-
Spookydriftr
- Posts: 78
- Joined: Wed Oct 02, 2019 2:57 am
- cars: 2003 vy Commodore s l67
Re: Wideband vy ecotec
Im trying to get mine to log too in my kalmaker tuned vy l67 commodore. Im using tunerpro with an enhanced adx that was make to log boost and wideband but i cant figure it out. Rhe bikst is logging perfectly and Im using 14point7 wideband. I really have no idea how this stuff all works so im trying to learn as I go but im struggling to get any info and im sure there would be a few people who would be happy to have this also. Cheers