connected up fine with an older version of 12P . removed chip and burnt 12P double stacked bin . now the cooling fans are on and pretty sure
its in limp mode . when the willem asked for an offset told it 08000 . any help would be appreciated . thanks . the reason to burn the chip was
an error message came up that it was an older version and couldnt upload to it . typed in 08000
nv ram cooling fan on
-
broady
- Posts: 5
- Joined: Sun May 24, 2026 5:05 am
- cars: VS iron lion
- Location: sydney
-
antus
- Site Admin
- Posts: 10014
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: nv ram cooling fan on
no offset when programming the stacked bin. stacked means there are 2 copies on there and the file is the exact same size as the chip with the the data in the right places. adding another 0x8000 offset would have messed it up.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
broady
- Posts: 5
- Joined: Sun May 24, 2026 5:05 am
- cars: VS iron lion
- Location: sydney
Re: nv ram cooling fan on
thanks
-
broady
- Posts: 5
- Joined: Sun May 24, 2026 5:05 am
- cars: VS iron lion
- Location: sydney
Re: nv ram cooling fan on
tested - working