PHF to BIN Converter

Ford information and tools can be found here
DWS
Posts: 254
Joined: Tue Oct 12, 2021 12:04 am
cars: Tons of Toyotas, 2003 cavi derby car, ford trucks, etc.
Location: USA

Re: PHF to BIN Converter - and maybe back eventually

Post by DWS »

The above 2 issues have been solved now. The file that gave an odd size had the segment start at an address other than 0000 so I assumed it needed padding there.

Everything seems to be working well now, I've uploaded a ton of random firmware files, TCM, boot sectors, any PHF file I have ran across. They all load and seem to dump file sizes that make sense to how I programmed the tool.

I'd of course need raw bin files directly from the devices to compare against the converted files to fully validate, but in theory the site should work with just about everything, the only questionable part is the padding of the file. Most seem to include a file type header, so any special cases can likely be based on that header.

Either case, feedback and confirming the resulting bin is the correct size and flashes correctly with the padding and such is always welcomed.



Here are some of the file types I've ran across:

Code: Select all

SPANISHOAK
GREENOAK-1536K
BOAK
ETMHC12
BOAK   
GREENOAK
GREENOAK-Siemens-P356-2M
Silver Oak
SILVEROAK-BOSCH-HWI
SILVEROAK-Siemens
SILVEROAKVIST5R2048K
Here's some module types

Code: Select all

VK2-C3803
ME9.0
VK2-C3901
8T4A-12B684-AA
SBU-471
VH2-W1614
ASV-125
VK3-L5801
LBO-527
DPU-231A
DPU-232   
DPU-252A
DPU-251A
DPU-461
DPU-462
8C3A-12B684-BA
TCM-ASM
EDC7C1
EDC16C3
Transmission Control Module
ESU-131
EDC16C34
EDC16C34-4.33
SID803
Power liftgate
VRM
BG3-L1721
TCM
8G1A-12B684-CA
BG3-L1731
VK2-C3815
9W7A-12B684-DA
SIM24
HBO-424
SID206
SID83A
EDC16C7-7.30
MED7.8.1
Ford EEC-V Tuner Site
  • Immo Off, PATS, Security only currently
  • Bank Swapping
  • View VIN and other info about the bin file
PHF to BIN Converter/Viewer
User avatar
Knackersjewels
Posts: 156
Joined: Thu May 05, 2022 10:24 am
cars: Stock VZ SV6
Cammed VZ SV6 (sson to be 6L45 converted and twin turbo)
VY SS L98 ute
VZ V6 AWD One Tonner
Location: Maffra, Vic

Re: PHF to BIN Converter

Post by Knackersjewels »

How are you guys reading/writing the pcms with pcmflash? I can't find an option that will write to the falcon pcms?
DWS
Posts: 254
Joined: Tue Oct 12, 2021 12:04 am
cars: Tons of Toyotas, 2003 cavi derby car, ford trucks, etc.
Location: USA

Re: PHF to BIN Converter

Post by DWS »

What's the part number or hardware id?

If it's EEC-V 216k, PCM Flash works great from what I've been told. 112K and older the main route is the J3 tuner chips (works for 216k too). The newer stuff I'm pretty sure PCM Flash works as well, but that's outside of the computer types I know much about (the Spanish Oak, Black Oak, etc era).

The biggest thing about the EEC-V 216k computers is the hardware adapter must support for J1850 protocol and the ~18v FEPS signal which most adapters don't support and is a direct requirement for writing. Ford Mongoose and Scanmatik Pro are two known options that work well but costs quite a bit. Avoid the China clones if possible, they are known to be unreliable.
Ford EEC-V Tuner Site
  • Immo Off, PATS, Security only currently
  • Bank Swapping
  • View VIN and other info about the bin file
PHF to BIN Converter/Viewer