GM Can info & knowledge share

E38 E92 and many others. Approximately 2007 and newer
OldSkoolGP
Posts: 18
Joined: Thu Sep 23, 2021 12:12 am
cars: 2006 VZ Pontiac GTO, 2005 VZ Holden Crewman SSZ

Re: GM Can info & knowledge share

Post by OldSkoolGP »

gixxer92 wrote: Sat Oct 17, 2026 4:17 pm This is a comparison of your OS to the Gen 1 8HP valve body. It's possibly more information than you wanted but i got a 2017 Chrysler 300 SRT with an 8HP broken apart over night along with an xdf for both.
By this afternoon it will be all confirmed.
Hope it helps.
Wow! That was a lot of information to parse through! Thank you for all the effort. This gives me some things to eliminate off the bat.

CAN ID 0x120 - The E38 is transmitting something for the odometer. I don't think that is necessary in the Holden VZ platform as I believe the cluster keeps track of the mileage accrual by itself, so those messages could be turned off.

CAN ID 0x140 - The E38 is listening for some T43 communication, but not transmitting anything. The 8HP it seems is listening for brake, vehicle speed, and ACC data from I assume the Dodge version of an EBCM. Should be able to stop the E38 from listening on 140.

CAN ID 0x170 - The E38 is transmitting something unknown, but the 8HP is either listening for or transmitting gear state, so that could be a problem. Need to figure out what the E38 is doing here.

CAN ID 0x180 - No info on what the E38 is transmitting or what the 8HP is doing. More info is needed.

CAN ID 0x2E0 - No info on what the E38 is listening for or what the 8HP is doing. More info is needed.

CAN ID 0x2F9 - The E38 is listening for info from the EBCM. No info on what the 8HP is doing, but this could be a potential issue. I can see a lot of date frames going through this ID.

CAN ID 0x3D1 - The E38 is transmitting info on throttle, fuel cut, and engine warnings, probably to the T43. No info on what the 8HP is doing. This could be a problem.

CAN ID 0x3E9 - The E38 seems to be transmitting wheel speed and rolling distance. No info on what the 8HP is doing. If this info is intended for the TCM, it could potentially be turned off so long as the MaxxECU doesn't need it.

CAN ID 0x3FD - The E38 is listening for something but not transmitting. The 7HP only transmits here if you use a BMW shifter. I can use a Dodge shifter, problem solved.

CAN ID 0x4C9 - The E38 seems to be listening for Trans Oil Temp, thermal management, and malfunction status info from the T43. No info on what the 8HP is doing. More info is needed.

3 or 4 potential conflicts can be solved, 3 need more info, and 3 could still be conflicts. It's a good start. I need to reach out to MaxxECU about the potential of changing what IDs it listens to and transmits on to get rid of more conflicts.
User avatar
gixxer92
Posts: 26
Joined: Sat Mar 03, 2018 3:08 pm
cars: 1986 Camaro IROC (LS7/Tremec Magnum 6-speed)
1988 Firebird Trans Am
2017 Chevrolet Silverado, 6.6L L8T, 10 Speed
2017 Indian Road Master

Re: GM Can info & knowledge share

Post by gixxer92 »

If you run into anything else you want reviewed, throw it at me. More than likely I've got more data since last month, when I sent the last. :)