Hi everyone,
I have a vp v6 I would like to tune.
I have fitted the NVRAM, USB comms board and RW line wire to the ecu (service no. 1227808)
double checked all is correct, everything soldered nicely ect.
When ignition is powered on, fuel pump primes, engine fan starts up? but engine will not fire.
Any tips on what I may have done wrong?
The vehicle does have a camshaft in it and the ecu contained a crow cams memcal to suit,
not sure if this perhaps has anything to do with my issue.
Any help would be much appreciated, as again this is my first attempt.
Cheers Luke
vp v6 startup issues
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: vp v6 startup issues
can you communicate with it from the pc? fans on sounds like the nvram might be in limp mode and might need to be reloaded in a programmer.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Hey antus,
I havn't tried to communicate with it with the pc yet, just stopped there to ask for some advice.
I'll give that a go in the morning and let you know.
Thanks mate appreciate your help.
Cheers Luke
I havn't tried to communicate with it with the pc yet, just stopped there to ask for some advice.
I'll give that a go in the morning and let you know.
Thanks mate appreciate your help.
Cheers Luke
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Hey antus,
also mate I took your advice and have ordered a t48 programmer that hasn't yet arrived,
sounds like I may need that.
By the way, love your car collection, kinda my thing
also mate I took your advice and have ordered a t48 programmer that hasn't yet arrived,
sounds like I may need that.
By the way, love your car collection, kinda my thing
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Hi antus,
sorry for late relpy, just got back to looking at this.
I haven't used tunerpro for over 6 years, so still tyring to refresh my memory on it all.
So, no I can't communicate with the vehicle via pc, still not sure if I perhaps don't have things setup correctly.
When I first loaded tunerpro I couldn't set comm port and program kept crashing so I uninstalled it and intalled V5,
this sorted that problem.
If I check the cable it will recognise with cable plugged into usb comms but not without.
Set in DataAcq./Emulation tab- use plugin and OSE plugin for both data aquisition and emulation, set to comm port 13 as comes up when driver was installed. Vehicle type set to other, and have tried with cable echo on and off.
I am then clicking on initialise emulation hardware button and get OSEPlugin connection problem tab.
If I go to mydocuments/tunerpro files/plugins, I can see OSEPlugin.dll installed all those years ago when I last played with tunerpro and ELM327Plugin.dll seems to be from when the cable driver installed several days ago.
I tried changing from OSE to ELM327 in DataAcq./Emulation tab with the same result.
What am I getting wrong here? appreciate your help.
Cheers Luke
sorry for late relpy, just got back to looking at this.
I haven't used tunerpro for over 6 years, so still tyring to refresh my memory on it all.
So, no I can't communicate with the vehicle via pc, still not sure if I perhaps don't have things setup correctly.
When I first loaded tunerpro I couldn't set comm port and program kept crashing so I uninstalled it and intalled V5,
this sorted that problem.
If I check the cable it will recognise with cable plugged into usb comms but not without.
Set in DataAcq./Emulation tab- use plugin and OSE plugin for both data aquisition and emulation, set to comm port 13 as comes up when driver was installed. Vehicle type set to other, and have tried with cable echo on and off.
I am then clicking on initialise emulation hardware button and get OSEPlugin connection problem tab.
If I go to mydocuments/tunerpro files/plugins, I can see OSEPlugin.dll installed all those years ago when I last played with tunerpro and ELM327Plugin.dll seems to be from when the cable driver installed several days ago.
I tried changing from OSE to ELM327 in DataAcq./Emulation tab with the same result.
What am I getting wrong here? appreciate your help.
Cheers Luke
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: vp v6 startup issues
oseplug is right and you see it in the list is loaded correctly. so there probably is a problem with the nvram or comms board install. fans shouldn't come on solid, that is a sign that it is not running. You probably do need to put a fresh copy of ose12p on the nvram in a programmer to recover it.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Thanks antus,
still waiting on programmer to arrive, what would be the most common mistakes made when installing nvram and usb comms?
I keep checking myself on the install and all appears to be good, but this is my first attempt so could easily be missing something.
If I put the original crow cams memcal back in will this indicate I have not got the install right (as vehicle was running untill I played with the ecu!) or will this not work because the rw line wire and usb comms have been soldered in?
Let me know.
Cheers Luke
still waiting on programmer to arrive, what would be the most common mistakes made when installing nvram and usb comms?
I keep checking myself on the install and all appears to be good, but this is my first attempt so could easily be missing something.
If I put the original crow cams memcal back in will this indicate I have not got the install right (as vehicle was running untill I played with the ecu!) or will this not work because the rw line wire and usb comms have been soldered in?
Let me know.
Cheers Luke
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: vp v6 startup issues
plugging or unplugging the memcal with it powered, shorting the back of the pcb to the metal shell of the pcm. and when running loading a mismatched bin in to the nvram or doing edits with a mismatched XDF. and for logging its having the wrong echo setting in oseplugin (echo should be on for most hardware types). Having the PCM jumper set wrong (should be unset for 808 and set for 424). And lastly running it without the write wire installed properly and RW jumper on at the same time.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Hi antus,
thanks again for your help,
plugged in the original memcal and vehicle runs as before,
looks like your initial thoughts were correct, nvram in limp mode.
I'll wait for t48 programmer to arrive and go from there.
Cheers Luke
thanks again for your help,
plugged in the original memcal and vehicle runs as before,
looks like your initial thoughts were correct, nvram in limp mode.
I'll wait for t48 programmer to arrive and go from there.
Cheers Luke
-
LukeO
- Posts: 12
- Joined: Thu Sep 24, 2026 11:43 pm
Re: vp v6 startup issues
Hi antus,
sorry mate I'm a serial pest at the moment!
Doing some reading regards reprogramming nvram with xgecu t48 progammer,
is it correct that I will require the correct bin file to suit the vehicle? If so exactly where do I find this and anything else I require.
Thank you.
Cheers Luke
sorry mate I'm a serial pest at the moment!
Doing some reading regards reprogramming nvram with xgecu t48 progammer,
is it correct that I will require the correct bin file to suit the vehicle? If so exactly where do I find this and anything else I require.
Thank you.
Cheers Luke