vp v6 startup issues

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: vp v6 startup issues

Post by antus »

its in the ose12p zip file where you also got the adx, xdf. write one of the ones with 'stacked' in the filename to the nvram. when you unpluh the nvram chip from the board to put it in the programmer be extra careful. The pins are thin and easy to bend and break, especially the last one to come out if it pops out quickly. So make sure it comes out slowly. On the way back in make sure all the pins are going down the sockets, sometimes one can catch on the edge and bend instead. only apply the pressure to push it right down after you can see they are all going in properly.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
LukeO
Posts: 12
Joined: Thu Sep 24, 2026 11:43 pm

Re: vp v6 startup issues

Post by LukeO »

Hey antus.
thanks, I bought the nvram from Gareth just recently, he loaded the file in it for me, so I don't think I have ose12p zip file,
I installed the nvram, soldered in the write wire and usb comms as per instructions and am now floundering due to ignoance!
Trying hard to ensure I have a complete understanding of exactly what I am doing and why, but my ageing feeble pea brain does have limitations.
Let me know.
Cheers Luke.
User avatar
antus
Site Admin
Posts: 10111
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: vp v6 startup issues

Post by antus »

click the link in my signature to the FAQ and have a look there. Lots of information and links to the threads you'll need including ose12p itself.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
Rapidfire
Posts: 66
Joined: Sun Oct 18, 2026 9:56 am
cars: Vp Group A Rep
Ve 6.0 Lsa 6 speed Ute
Vf Redline Wagon
L300 Van with 3.8 Buick

Re: vp v6 startup issues

Post by Rapidfire »

hey dont hate on me, but Luke have you thought about using onerom setup, check my onerom app out. it simplifies things, then you got real time though moates emu ??

You can still use ose12p :silent: and there cheap

let me know if you need help setting it up. if you decide