I recently put some bosch 0 280 155 968 injectors into my buick v6 . Running 12p ,have up dated injector tables with the 1's calculations that were on this forum.
Set my single fire /double fire to 2.1 and 2.5 as it idles at around 2 bpw. For some reason it's showing 100% duty cycle on idle and throughout the Rev range. I'm running 3bar ,so 41lbs . I just got rid of the 19lbs as I was running at full duty cycle in the mid to high rpm. I plan on installing a turbo so preparing the ve with new 968's.
Fuel reg is running fine ,have got 3bar under load etc ,can easy obtain afrs ,so am wondering why this would be . Voltage is a stable 13.9 to 14.1 volts ,running bosch 044 fuel pump.
Kinjflow set at 0.072 ,100 kpa @6000rpm reads 12.5 afr at 88% VE ,so not the flow rate,got that set .
Watching the bpw,it's acting how it should ,anyone struck this problem before ?
100% duty cycle on idle?
-
jessejames09
- Posts: 24
- Joined: Thu Mar 27, 2014 11:02 am
- cars: 1972 valiant coupe 360ci
1993 ln130 hilux with 3.8 v6 holden motor transplant. - Location: New Zealand
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: 100% duty cycle on idle?
post a bin and a log, sounds like there might be a typeo somewhere.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
jessejames09
- Posts: 24
- Joined: Thu Mar 27, 2014 11:02 am
- cars: 1972 valiant coupe 360ci
1993 ln130 hilux with 3.8 v6 holden motor transplant. - Location: New Zealand
Re: 100% duty cycle on idle?
I was just about to remove the post because I found the clerical error ....I had the wrong function set on adx ...was for BLM not duty cycle vs rpm vs BPW .
Thank you anyways ... I'm off for some self abuse
Thank you anyways ... I'm off for some self abuse