Low speed thermo setup
-
Kevspec
- Posts: 246
- Joined: Tue Jan 22, 2019 2:14 pm
- cars: Vs 215i grange
Re: Low speed thermo setup
Sorry to dig this up but car still in pieces and haven't been able to try this but also how do I get that up to try and configure it on my pc atm?
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Low speed thermo setup
Thats in ose flash tool. It patches the bin code, and patches the XDF to give you an XDF that knows what has changed. You need to update the OS after patching your bin for the changes to be active. I think there may also be a flag to turn on the scheduled message output, but I am not sure off the top of my head. Its not a commonly used feature.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Kevspec
- Posts: 246
- Joined: Tue Jan 22, 2019 2:14 pm
- cars: Vs 215i grange
Re: Low speed thermo setup
yeah doesn't seem like a common thing as most people take the easy way out, engine bay is getting rewired when it goes back together so you wouldn't even notice
-
Kevspec
- Posts: 246
- Joined: Tue Jan 22, 2019 2:14 pm
- cars: Vs 215i grange
Re: Low speed thermo setup
ok digging up a old thread trying to do this on customers cars, atm i have changed to bcm fan in ose and in the tune but from what i can tell the trigger pin is a6 which in a v8 is ignition and when it trys to turn on it kills the engine.
-
Wade
- Posts: 1247
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: Low speed thermo setup
Honestly bro. Factory clutch fans are generally sweet, even with higher rpm. The 2 biggest problems are generally weak engine mounts obviously, and then water pump cavitation due to spinning the water pump harder. Ain’t that hard to fit a larger pulley to slow a pump down though. That’s just my 10c worth. Unless you’ve got full pwm control over elec fans and possibly even high/low ect, it just causes more problems than it solves.
-
Kevspec
- Posts: 246
- Joined: Tue Jan 22, 2019 2:14 pm
- cars: Vs 215i grange
Re: Low speed thermo setup
Ive had plenty of customers cars with them being faulty and yes they do work great but this setup had to be removed due to clearance with supercharger setup.
-
Wade
- Posts: 1247
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: Low speed thermo setup
Can you share the belt setup that it’ll be running?
-
Kevspec
- Posts: 246
- Joined: Tue Jan 22, 2019 2:14 pm
- cars: Vs 215i grange
Re: Low speed thermo setup
As to why it wont fit you mean? It is a vs senator with a vortech and a 8 rib crank pulley to make it all clear the balancer the fan needs to be spaced over 10mm forward then does not located on the pump anymore and have also seen pumps fail in other engines from spacing the fan
-
Wade
- Posts: 1247
- Joined: Sun Jul 10, 2016 8:29 pm
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: Low speed thermo setup
Yeah the pumps ain’t that solid on these. Doesn’t take much for the bearings to collapse.