Holden ECU BIN Calibration Index — 55 Files

[KingAustraliaggGG]

Holden ECU calibration reference index

I've compiled a reference index for 55 distinct Holden/GM ECU firmware images to help compare OSIDs and calibration variants against the existing Stock Holden Bin Files collection.

Attachment: KingAI_Holden_ECU_Calibration_Index_R4_55.zip
Contains a CSV index and a short README (identification data only, not firmware BINs).

Coverage:
P01 — 19
P59 — 5
E38 — 23
E55 — 4
E77 — 2
E78 — 1
E98 — 1
Total: 55

The index lists ECU family, operating system ID (OSID), calibration segment identifiers, firmware image length and full SHA-256 hashes. It can help identify exact image matches and distinguish calibrations that share the same OSID.

Existing Holden BINs: I also compared 214 3.8L/5.0L-era Holden BINs from my collection with the local PCMHacking archive. There were 134 exact BIN matches in Topic 3 and 80 elsewhere in the archive, so I haven't reposted those duplicates.

Some original source labels are incomplete or ambiguous, including a 2012 Holden 6.2L Non-Sedan file. Please confirm hardware/software identity and calibration before using any firmware.

This attachment is an identification reference. The complete firmware files are not included in this index post.

Corrections, additional factory calibration information and duplicate matches are welcome.


Jason King
KingAI Pty Ltd
www.kingai.com.au

[KingAustraliaggGG]

P01 P59

[KingAustraliaggGG]

I have xdfs for each of these, but i am unsure if i should be posting them here. about 500-1000 objects in each.

if people would like a xdf for any of these to see if pcmhammer and tunerpro is better for them. some of the xdfs expose more than paid editors.