Ose not reading NVRAM
-
Asho88
- Posts: 189
- Joined: Fri Dec 13, 2024 5:32 am
- cars: Vh Commodore 253 looking to convert to fuel injection.
Ose not reading NVRAM
Hey guys me again haha. The cars been out of action for a bit as done a head gasket and swapped the cam. Anyway the car is not wanting to start so I’ve turned to checking the tune. The NVRAM seems to be functioning fine was able to get the tune off of it but it won’t connect to reload a fresh tune. It’s coming up with BCM chatter issues. It’s an 808 ecu so to my knowledge there is no bcm so assume it’s a settings error?
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Ose not reading NVRAM
How did you determine it is working? Typical failure mode is momentary short circuit or incompatible upload and it soft bricks and needs a programmer. All of being able to get the tune off it but wont connect is not a clear failure mode. How do you get the tune off of it if you cant connect?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Asho88
- Posts: 189
- Joined: Fri Dec 13, 2024 5:32 am
- cars: Vh Commodore 253 looking to convert to fuel injection.
Re: Ose not reading NVRAM
Going by the power light was turning off after about 3 seconds once the ignition was turned off. I reprogrammed it thinking that was possibly the issue but now I can’t reload the tune. I’m not sure just calling it as I see it. It connects fine but failing to write on a new bin my apologies if it wasn’t clear what I meant.
-
antus
- Site Admin
- Posts: 10111
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Ose not reading NVRAM
Without more detail its a bit hard to call. Put the stock standard stacked 12p bin on it from the original 12p zip file (download it again if you need to) and try and connect. If you can then upload just your cal over ALDL.
viewtopic.php?f=27&t=356
viewtopic.php?f=27&t=356
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
Asho88
- Posts: 189
- Joined: Fri Dec 13, 2024 5:32 am
- cars: Vh Commodore 253 looking to convert to fuel injection.
Re: Ose not reading NVRAM
Yeah that’s what I’ve done put the stick stacked 12p bin on it. When I try to write over that with my bin it fails stating about the Bcm
-
Asho88
- Posts: 189
- Joined: Fri Dec 13, 2024 5:32 am
- cars: Vh Commodore 253 looking to convert to fuel injection.
Re: Ose not reading NVRAM
This is what it’s saying when I try to write a tune.
You do not have the required permissions to view the files attached to this post.
-
Rhysk94
- Posts: 241
- Joined: Sun Mar 15, 2020 9:25 am
- cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Competition Drift Car
VY V6 L67 Seat Time Drift Car
N80 Toyota Hilux
VZ SS - Location: Perth
Re: Ose not reading NVRAM
You dont use ose to write to a NVRam mate
-
Asho88
- Posts: 189
- Joined: Fri Dec 13, 2024 5:32 am
- cars: Vh Commodore 253 looking to convert to fuel injection.
Re: Ose not reading NVRAM
That’s how I’ve been doing it. Write the stacked bin on with the EPROM burner then from there use the write cal with OSE.