vy v6 cam tune

jca · Post by **jca** » Tue May 17, 2011 1:05 pm

hi , just woundering if any has tuned a vy v6 for a 220/220@50 cam , I ve got the usb ob2 cable from vl400 and down loaded the flash tool etc and read the tune I ve made a few changes it idles ok but wants to stall easy when u snap open the throttle any help ideas would be great .

krusty · Post by **krusty** » Tue May 17, 2011 3:16 pm

220" looks like F/I territory. Is it supercharged?

Post by **Holden202T** » Tue May 17, 2011 3:27 pm

firs thing you probably need to increase the idle if you haven't already.

i'd be looking at power enrichment settings to sort out your throttle snap issue ....

pretty hard to say though without a decent log to look at.

jca · Post by **jca** » Tue May 17, 2011 7:21 pm

Hi, na no forced induction at this stage, i will have a play with the power enrichment settings but i would of thought maybe idle air flow etc as its not under load, just trying to get a nice idle before a few dyno pulls

Post by **antus** » Tue May 17, 2011 9:12 pm

Take it for a lap or two of the block and record the log and post it up for us to take a look.

vy v6 cam tune

vy v6 cam tune

Re: vy v6 cam tune

Re: vy v6 cam tune

Re: vy v6 cam tune

Re: vy v6 cam tune