Couldnt really find a section for this..
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Couldnt really find a section for this..
This is a HI level BCM from a VS Commodore V6. To access this chip i would need to unsolder it wouldnt I? I would also need some sort of nifty program and reader too.
The only reason to do this is simply to change the KMs on my level 3 dash. Or would i have better luck with a tech 1/2 to do that?
The only reason to do this is simply to change the KMs on my level 3 dash. Or would i have better luck with a tech 1/2 to do that?
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Couldnt really find a section for this..
umm isn't the km's in the dash cluster not the bcm ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Re: Couldnt really find a section for this..
Thats what i thought. Iv been told more its in the BCM then its in the dash. Ill find out in a few days i guess when i change the BCM in another car.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Couldnt really find a section for this..
The Kms are stored in the instrument cluster
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Re: Couldnt really find a section for this..
God damn it. So tech 2 it is then. Cheers guys.
Going for 3rd edit now.. I have the ALDL cable, no software. Is there something i can use for that? As i know tuner pro only does the memcals :/
Going for 3rd edit now.. I have the ALDL cable, no software. Is there something i can use for that? As i know tuner pro only does the memcals :/
Re: Couldnt really find a section for this..
scantools wont help on vs either as cluster isn't on the bus, unlike other models. It's stored on the chip on the circuit inside the 3 trip window display.
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Re: Couldnt really find a section for this..
This is interesting, because what i know is now just been prove wrong. Its got me curious how they do it, as their are shops that do it and holden can as well. But they require your old cluster. Well mine broke and for shits and giggles its constantly on 000000kms. By broke i mean the 100m cog snapped a tooth. As i thought it was just your little one, the common problem.
Re: Couldnt really find a section for this..
not sure, i know there was a thread here or somewhere else of someone with a trigger device, basicly hook it up, simulate a vss at super speed to wind the numbers over, not sure how they went with that.
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Re: Couldnt really find a section for this..
Might have a look, ill try anything untill it breaks. Prime example would be my plenum idea.
-
- Posts: 105
- Joined: Tue Jul 06, 2010 2:04 pm
- cars: VH, VK, VS, VU
Re: Couldnt really find a section for this..
Couldnt find this thread. Come to the conclusion, after reading some of doc bobs posts, that you need a VDO tool. I have found many for other makes and models. But never a holden. Would there me a similar car that is like the holden?
After some contemplation the dash is apart again. I have come to the conclusion that i either need to wire something up to the forth plug or remove the chip, thus needing a reader and translator. At this point im all out of ideas and its bed time.
After some contemplation the dash is apart again. I have come to the conclusion that i either need to wire something up to the forth plug or remove the chip, thus needing a reader and translator. At this point im all out of ideas and its bed time.