Help with setting up

[darky82]

Ok sweet, will give it a try, Thanks

[darky82]

VX L67 that link you posted wont work mate?

Capture.PNG

[antus]

Its a doc, you need to use microsoft word with it. Its also based on an american vehicle and definition but the what to click bits still apply to us.

[darky82]

Ok thanks. Also the "VR_$11_v1.04-tp5.zip gives me this when trying to connect

[antus]

Hmm ok thats strange. Thats not normally the filename, and also its not actually needed. Will have to check that out, must be a 'feature' thats new to Tp5 that hasnt been noticed until now. If its just a warning and TP ignores it then it should work anyway provided the echo setting in the adx is set correctly for your interface (echo on, I believe).

[darky82]

It wont even try to connect, echo is on in adx..

[darky82]

Ok all sorted i removed the OSE plugin from the required and optional plugins list in adx and it works.. Thanks all at dh sure to hang around.

[VX L67 Getrag]

LMAO! That plug in is causing a few issues, it should be on the DO NOT USE LIST! LOL

[vn5000]

I had the same problem with that adx a couple of weeks ago.From memory there was 4 files listed as dependecies and i erased them all and it worked fine then.
Jamie may be able to shed some more light on why they are there as he is the author of that adx.

[antus]

The plugin is needed for realtime as the realtime bins are the factory ones with code mods for to support aldl write. The logging protocol is the same. It looks like TP5 is watching how we use it in development and has added the dependancys. In reality though, the plugin is optional.... But untill it was mentioned here nobody had noticed.

General rule of thumb: Dont use the plugin for logging only. Do use the plugin for realtime, and disconnect the BCM to prevent bus chatter while realtiming which is the cause of trouble with the later models.