New To Whole tuning Theme and need help lol

[tommmay]

http://www.megaupload.com/?d=YOQYEXXN

With
Trying to get these problems sorted out so i can go for a tune
thing never wants to end.

Anyhelp would be much appreciated

[VL400]

So your saying adjusting the throttle stop screw out does nothing to the idle?

[tommmay]

adjusting it doesnt change the steps..

[yoda69]

OK, have had a quick look.
The equation in EFILive for MAF is incorrect, should have a factor of 0.0625 (which is 1/16) of the 16 bit value.
WIth this it is showing around 11 g/s at idle @1000RPM, normally is only about 4-9 g/s at idle so this is probably alright.
Biggest thing is the STFT are all max'd out idle, which makes it look like a vacuum leak, check all hoses are OK. What have you done with the EGR?
The IAC is at 0 Steps at ~1100RPM at closed throttle, so would close the throttlebody up a bit as the vehicle is trying to lower the idle but can't close the IAC any further as it is already at zero.
Try closing the throttlebody and monitor the IAC stops until you see 10-20 steps.

Once you've done this, post another a log.

yoda69

[tommmay]

So today I found 2pins on my maff earthing out traced the one back to both o2 sensors guessing they've both shit
Themselves and was also looking for vac leaks and found one in my reverse plenum not happy paid a bit for that i have a l67 yoda didn't have the egr cheers

[tommmay]

so found the vac leak car is ideling good now

still havnt done the 02 sensors but

I thought it was coming from my rods but the car is pinging
not sure if its because i changed it from l67 heads to ecotec or what
ima try regap the plugs and see how i go for tonight

[tommmay]

run with no 02s

http://www.megaupload.com/?d=TZ6IWTAL