starting and stalling problem

General Tuning Questions And Discussions
Post Reply
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

starting and stalling problem

Post by holden08 »

vp ecotec conversion. im having problems with the car starting it wont start unless i put my foot down then it will start and it will stall after i take my foot off after few seconds it will idle by it self then i rev it then it will stall when i take my foot off
Top
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: starting and stalling problem

Post by holden08 »

could it be iac or tps
Top
User avatar
antus
Site Admin
Posts: 9018
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:
Contact antus

Re: starting and stalling problem

Post by antus »

which ecu are you running? can you post a log?
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Top
holden08
Posts: 174
Joined: Wed Jun 16, 2010 7:17 pm
Location: kempsey nsw

Re: starting and stalling problem

Post by holden08 »

running the delco 808 ecu no i cant dont have the gear to do that stuff yet the other ecotec v6 ive done havnt had these problems just ping thats all
Top
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:
Contact Holden202T

Re: starting and stalling problem

Post by Holden202T »

i'd suggest as a starting point jumper the diagnostic link and see if you get any error codes from it!
Top
Post Reply

Return to “General Tuning Discussion”