wideband sensor

[drippy]

hi there, ive been reading over the forums and i haven't found if my wide band sensor can been hooked up to the ecu in my vy or if i need to log it through the data cable supplied,

from what ive been reading it is apparently easier to log it through the aldl link, i know thats how im going to set it up for my vk with the 808 delco, but just wondering if i can set it up with the vy the same?

thanks

[VL400]

There is some info here on how to hook it up, but the wideband was damaged somehow so just be a little careful .. https://pcmhacking.net/forums/view ... f=7&t=1457

[drippy]

i have been really slack in getting this setup hehe but ive just gone to do it but on wire b12 all the wiring guides have it listed as red but on my VY it is blue... and yes i have double checked the plug it is B12

any ideas? should i just hook it up anyways?

[drippy]

found my issue.... i was looking at the supercharged v6 wiring.. the inj mon is c14 on the NA computers
i have no idea whats on B12 on the NA but it doesnt bring any issues with it cut...

[vs ss]

From memory the b12 on vy n/a is the high speed fan.