Delco OSE FlashTool V1.51

[VX L67 Getrag]

Thanks VL!

Yeah already done the prefs as I tested & does work better at 15ms, but no big deal!

I had another issue but was more with tp5 so I'll post that in another thread but tried it on 2 different laptops both single core 2 & 2.4ghz with 1+ Meg of ram!

Cheers VX L67 Getrag!

[The1]

would be nice in the aldl command or listen window, the window itself is resizable but not the data window can we get it to resize with it.

[The1]

was using Flashtool on a VY today, wouldn't work well at 50ms wait for silence but does at 15ms, but was still very very slow, i got a bin down but took 25mins, then i stumbled on something weird, if im downloading the bin then click away from ose tool so another program or desktop has focus not OSE then it goes lightning quick!! not sure what's going on there or if it's even a ose issue, my cpu was going hard at it Core 2 Duo L9600 2.13Ghz, i thought it might have been my video card just a intel onboard in my laptop but still the same with the latest drivers.

[VX L67 Getrag]

That's really bizarre!

Mine all get a bin at 5.5 Kbps & the write endorser 4 Kbps!

Haven't actually timed it but each process somewhere around 5 minutes!

But if you write cal but select bin(which I think should be made 1st option), it only takes 1 minute!

So yeah really bizarre! But I only have single core 2ghz!(both my test lap tops)!

EDIT: Had Mbps instead of Kbps for transfer rate(not quite that quick!).

[The1]

i just have that issue on the flash pcm's, my vs goes quick either way. not to worried atleast i know how to get around it. But yeh mines dual core and if i dont change focus it sits there with 100% cpu.

[VL400]

I tried this only on a non-flash PCM and CPU was around 30%, will try it later on a flash PCM and work out what is causing it.

[big-town]

Hello!
Help me please.
Connect with settings

press Get bin - nice
write file to back - error
my log

logdat.rtf

Where an error?

GM-12 16209689 KDAC ZXWU SW for DAEWOO NEXIA 1.5l 75 2004
flash am20f010b

[VL400]

Sorry but it does not support the flash based Daewoo ECMs, I have not been able to find one locally to add support for them

[big-town]

Thanks for the answer. If it helps. That in combiloader at first registers in ram the program bootloader and then she is engaged in reception of the data and an writing.

[autodiag75]

Tell me, why do I assume the firmware - but there is no record? Car Daevoo Lanos 1.5 (ECU with 29F010 in case PL32). Maybe something not so infused in OSE Enhanced Flash Tool?