retrieving full bin not cal off nvram

[TTVN]

how can you retrieve a full bin off the nvram with tunerpro instead of a cal file or do u have to use the flash tool?

thanks rod

[Jayme]

you have to use the flashtool to get a full bin. the OSEplugin with tunerpro is locked to cal only to help speed things up.

[TTVN]

ahhh thanks for that

had me stumped lol

cheers rod

[VL400]

But ... GM had a bug in mode 2 which is used to get the bin. I fixed this in 12P but all other factory bins (including the RT enabled ones) have an issue where the very last byte is incorrect (need to hex edit it so its the same as the 3rd last byte). Also, you cannot get the entire bin from VS ecotec or later 128k memcal due to the bank switching - the flash PCMs can get the entire bin as I load code to RAM and execute that for reading and writing, but you cant have the engine running as it no longer runs any of the normal code.

[antus]

Yes, as above. Its on the feature wish list to make that other new download from emulator button that appeared in recent TPs do it, but I dont know when that'll be as there are ways already and Im pretty busy in the near future.

[TTVN]

thanks for the replies guys , appreciate it