Yeah cool thanks i think i have found an alternative solution
off to jaycar tomorrow for the bits to build a serial programmer from this site using their software http://www.lancos.com/prog.html
Odometer reset Trial will this work
Re: Odometer reset Trial will this work
Did you happen to have any luck with this??? About 12 months ago I brought a level 3 dash from ebay with roughly the same amount of kms my ute had done. 12 months down the track and finally today i got around to wiring it up so the odo worked and it says 420,000 not 245,000 that I thought it was ment to have.
I know I can take it to my local vdo centre in town and for $150 they said they can put whatever reading I wanted on there as long as i have my origional cluster to show them.
I would just be more keen to try and have a go at doing it myself if it is possible.
I do have a GQ-4x programer
Cheers for any advice
I know I can take it to my local vdo centre in town and for $150 they said they can put whatever reading I wanted on there as long as i have my origional cluster to show them.
I would just be more keen to try and have a go at doing it myself if it is possible.
I do have a GQ-4x programer
Cheers for any advice
Not in the shed anymore 
Ek wagon 0-60mph 6.19 20/4/07 G-Tech so there is no cheating using m62
Now vp ute with a m62
Ek wagon 0-60mph 6.19 20/4/07 G-Tech so there is no cheating using m62
Now vp ute with a m62
-
harleysayed
- Posts: 1
- Joined: Tue Oct 11, 2011 7:39 pm
- cars: vs commodore
Re: Odometer reset Trial will this work
can u please send me the Bin file for vs commodore the reading for the cluster is 160k, i have the tool but not the calculation beacuase i stuffed the bin file...thankyou.
Doctor Bob wrote:all the 5's indicate an error yes, do you have/want some bin files to look at?
the programmer needs to support I2C serial EEPROM's
pm me & ill send a couple of bin files i have
the tool is about $5k...lol
Rob