Post Your Delco Powered Ride Here
The1
Posts: 4811 Joined: Mon Jan 04, 2010 10:23 am
Post
by The1 » Sun Jan 22, 2012 1:10 pm
lol the fun never stops
Holden202T
Posts: 10394 Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:
Post
by Holden202T » Sun Jan 22, 2012 4:20 pm
reminds me of a charade that was at the drags when i last went, not sure what was in it but falcon rims on the rear and v8 sound coming out of it, did a solid burnout!
VNracer34G
Posts: 345 Joined: Sun Apr 05, 2009 1:07 pm
cars: VN V6 Production Saloon
Location: Gisborne NZ
Post
by VNracer34G » Sun Jan 22, 2012 7:38 pm
Seriously solid effort mate
How many of those 1mm discs did it take?
Build it, Race it, Break/Bend it ; Repeat.
delcowizzid
Posts: 5630 Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:
Post
by delcowizzid » Sun Jan 22, 2012 7:48 pm
only 3 discs mate .all the gaurds are now welded back up and look cool and the diff is temporarily mounted so it can roll round
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
VNracer34G
Posts: 345 Joined: Sun Apr 05, 2009 1:07 pm
cars: VN V6 Production Saloon
Location: Gisborne NZ
Post
by VNracer34G » Sun Jan 22, 2012 7:52 pm
Now that is cool, most guys lean on those little discs ( i have been guilty of that in the past ) and chew them out quickly
Build it, Race it, Break/Bend it ; Repeat.
delcowizzid
Posts: 5630 Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:
Post
by delcowizzid » Mon Jan 23, 2012 7:38 pm
yesterdays gaurd patching pic all tacked in ready to fully weld when it comes back with its cage in and we can drop the diff out
IMGP5908.jpg (77.14 KiB) Viewed 3312 times
IMGP5912.jpg (94.66 KiB) Viewed 3312 times
the old cooler out the GTS in for a looksee
IMGP5910.jpg (139.13 KiB) Viewed 3312 times
and the rear shot
IMGP5916.jpg (70.51 KiB) Viewed 3312 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
VNracer34G
Posts: 345 Joined: Sun Apr 05, 2009 1:07 pm
cars: VN V6 Production Saloon
Location: Gisborne NZ
Post
by VNracer34G » Mon Jan 23, 2012 8:13 pm
AWESOME
That things gonna be one fucking wild ride when it hits boost,
Have you made a decision on your intake yet?
Build it, Race it, Break/Bend it ; Repeat.
Holden202T
Posts: 10394 Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:
Post
by Holden202T » Mon Jan 23, 2012 9:52 pm
love the rear end pic, you know its so wrong for that car, but it looks so right
delcowizzid
Posts: 5630 Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:
Post
by delcowizzid » Fri Jan 27, 2012 8:45 pm
cheers guys
some 4link mounts
still undecided if ill use these ones or not i have a 2nd set being cut that are a bit different
IMGP5919.jpg (83.35 KiB) Viewed 3312 times
IMGP5917.jpg (72.12 KiB) Viewed 3312 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
delcowizzid
Posts: 5630 Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:
Post
by delcowizzid » Thu Feb 23, 2012 8:27 pm
manifold porn
Attachments
vr manifold.jpg (129.53 KiB) Viewed 3606 times
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem