wideband O2 sensor & tunerpro V5

[v6psi gem]

ok guys have got the wideband up and running, have taken a couple of logs.. just can't seem to copy the w/band o2 log into excel.. can copy any table in tuner pro or excel, just can't seem to copy off the log.. any suggestions on wat i'm missing would b helpful cheers??

[VL400]

Can either use "Export Log File" from the Acquisition menu to get a CSV file for excel or just copy/paste from the history tables straight to excel - to copy there is no right click in the history table view so use the keyboard shortcut ctrl C (hold control and press C).

[v6psi gem]

Can either use "Export Log File" from the Acquisition menu to get a CSV file for excel or just copy/paste from the history tables straight to excel - to copy there is no right click in the history table view so use the keyboard shortcut ctrl C (hold control and press C).

Thanx.. knew i was missing something.. with the tables being different sizes do i just modify the table in excel to suit??

[antus]

Yes, but theres a spreadsheet to help here:

edit: removed link

[v6psi gem]

Yes, but theres a spreadsheet to help here:

edit: removed

apparently i'm not authorized to view that that thread

[delcowizzid]

haha yeah the link goes to the admin section where the spreedsheet is ant

[antus]

Doh!

No wonder I was having trouble finding it. Here it is:

Its set up for 2 bar.

Note that its absolutely important that your wideband is calibrated properly, and reading accuratly in the pcm's data stream.

[v6psi gem]

HaHa Thanx guys that looks heaps better

[v6psi gem]

ok got it running again. having lean surging problems tho.. help plz lol
Am running standard injectors with the diffuser plates drilled out, OSE 12$P bin & 1,2&3 bar xdf, Have uploaded a idling log if someone could take a look & throw up any suggestions cheers

[delcowizzid]

8 cylinder mode and 8 cyl memcal flags are on when i veiw the log and map is real high what sort of setup you running not a throttle in front of blower intercooled setup