16206305 (16183082 inside) R/W wire

[jezzab]

Hey guys.

Ive got a 16206305 (written on the case) but the reference pics I see over the forum are different. I did find one pic and its says that its a 16183082. Im trying to run the write enable wire as per the instructions for the NVRAM memcal board from VL400 but they reference a pic for a 16206305.

Mine looks like the one on the right and in the bottom of this post:
https://pcmhacking.net/forums/view ... 3082#p9839

The PCB layout is different to a 16206305 so im at a loss where to solder the wire. Any help would be appreciated

Cheers
Jez

[festy]

Have a look at the PCB's edge connector near the memcal socket.
Find the #1 contact - there will be a small white '1' printed on the PCB at one end, it should be the opposite end of the PCB to the memcal's #1 pin.
Trace that edge connector contact back, and see if it comes out near where your instructions show.
Or, just solder the wire to the #1 contact on the edge connector

edit: probably best to trace that track before just blindly trusting my memory though, I have been known to be wrong occasionally

[jezzab]

Cheers mate. I just looked at the pic big big zoom and picked it up.