My Delcoed Rides

Post Your Delco Powered Ride Here
User avatar
Jayme
Posts: 2585
Joined: Sat Feb 28, 2009 10:59 pm
Location: North Coast, NSW

Re: My Delcoed Rides

Post by Jayme »

Wicked! :driving: next time card from eastern creek should be the best ever for the little gem.
v6bucket
Posts: 769
Joined: Tue Jul 21, 2009 12:02 am

Re: My Delcoed Rides

Post by v6bucket »

Good result. :thumbup: That's good enough to into the high 12sec on the 1/4 mile.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: My Delcoed Rides

Post by Holden202T »

well it might even be quicker than high 12's ..... but that will depend, it looks like from the dyno graph im going to be almost on the limiter at the line! that is only going off other cars that have run in the 12's and their mph!
VNracer34G
Posts: 345
Joined: Sun Apr 05, 2009 3:07 am
cars: VN V6 Production Saloon
Location: Gisborne NZ

Re: My Delcoed Rides

Post by VNracer34G »

Nice curve mate. :thumbup:
So that means your on for a good timeslip if its nudging the limiter :?: ;) out of curiosity what have you got the limiter set?
Build it, Race it, Break/Bend it ; Repeat.
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: My Delcoed Rides

Post by Holden202T »

rev limit is 7000rpm.

ok for those interested, heres some stats of what was changed on the dyno.

so this is where i changed spark, negative is what i removed, positive what i added - mainly only the WOT areas, the cruise areas was smoothed out from what i did at 2000-2400rpm last week.
spark%20changes.jpg
similar to above but the ve table.
ve%20changes.jpg
and this is my laptop log of the last power run .... you can see shes a tad rich in the middle of the rev range but thats something i can easily sort out at the track with a few logs. didn't want to spend too much more time on the dyno with it fixing that, it costs too much :P
last%20dyno%20run.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: My Delcoed Rides

Post by Holden202T »

fingers crossed te weather will be fine tomorrow and i can go to WSID!!! :driving:
User avatar
Apples
Posts: 151
Joined: Sat Feb 28, 2009 11:57 pm
Location: Darwin, NT

Re: My Delcoed Rides

Post by Apples »

My fingers crossed for you to :lol:
Don't make excuses. Make more horsepower.
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: My Delcoed Rides

Post by Holden202T »

well it was a great night, engine ran perfectly aside from getting a bit warm in the staging lanes.

so ended up with a best of 13.04 @ 168km (104mph) so i now have a new goal of cracking the 12's hehe.

ok so for those interested i have some videos....

in car
[youtube]http://www.youtube.com/watch?v=RoH8KzPpnZU[/youtube]

out of car
[youtube]http://www.youtube.com/watch?v=c1XNvuaxYM8[/youtube]

also have time slips of my 4 runs here: http://www.oldholdens.com/images/cars/d ... 2-15-WSID/
last run i tried to load the car on the converter more and the brakes didn't hold it and i popped a cherry :oops:

the only issue i had was the springs in the back are too soft and the car squats too much and the tailshaft hits the floor, you can hear it in the in car video when i take off and again when i change into second, but only minor issues i'm sure i'll be able to resolve pretty easily!
yoda69
Posts: 1226
Joined: Sun Mar 15, 2009 12:20 am
cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual
Location: Geelong, VIC

Re: My Delcoed Rides

Post by yoda69 »

Nice work.
Definitely a good start, can only get quicker from here.
:driving:
User avatar
Holden202T
Posts: 10435
Joined: Sat Feb 28, 2009 11:05 am
Location: Tenambit, NSW

Re: My Delcoed Rides

Post by Holden202T »

also heres a log of the pass ....
2012-02-15-drags%20log1.jpg
You do not have the required permissions to view the files attached to this post.