loging with tuner pro?

[python]

hi all, im having trouble loging on tuner pro. i have a vr v6 auto turbo. what files do i need to load on tuner pro? i just cant get my head around what i need to do. any help would be great. cheers ash

[The1]

if it's stock vr auto pcm it's a 16176424, can find the adx in the sticky up the top.

Starter guide to logging also here
https://pcmhacking.net/forums/viewtopi ... =10&t=2223

[python]

ok, i have the correct adx and can load other bins, but still cant log. I have no problem with efilive. I cant seem to find how to connect to tuner pro. What am i missing

[The1]

are you getting connected? Could be echo settings, got the right port selected, did you read the guide?

[python]

yes i have read the guide. Does tp connect automatically? I get no connection at all.

[antus]

tell us more about your setup. what type of com port? what com port number? what aldl interface? what happens when you try to connect? what does tunerpro say in the status bar down the bottom?

[python]

antus, i am connected com port 1. I dont see a status bar at the bottom? I do see the status bar in tprt however? Im sure it is just a wrong setting on my part. Cant wait to get this working so i can iron the bugs out of a 2bar tune i have.

[The1]

like in the guide it should show the blue icon saying connected at the bottom, do you have this?

[EagleMark]

ok, i have the correct adx and can load other bins, but still cant log. I have no problem with efilive. I cant seem to find how to connect to tuner pro. What am i missing

Acqusition then Start/Stop data Scan... or if you right click on tool bar and check all tool bars you will find a button with 2 blue arrows.

[Holden202T]

i'm sure all the info on how to do this is in a guide somewhere ?