my friend has a few ecu`s from different models, and my question is can a v6 auto 16231448 ecm be converted to run v8 manual, he has many other ecus so if its easier to do on other part number i can get from him and play with programmer, any links or info appreciated.
Mark
ecu convert from v6 auto to v8 manual ?
-
mark
- Posts: 13
- Joined: Tue Sep 13, 2011 9:58 pm
- cars: 2 x vs commadore, 1 x 04 monaro 5.7l, 3 x wb caprice, 3 x ek sedan, 1 x v8 hx sandman, and a 02 jakaroo 3ltr turbo diesel.
- Location: Gawler - SA
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: ecu convert from v6 auto to v8 manual ?
16231448 is a vs v6, and the vs v8 manual was the last that still used the '808 pcm, so it would not be an easy swap. Your best bet would be to get an 808 and loom from a vn, then modify the v6 memcal to make it a v8 one, and run factory vs v8 code, or $12p on it if you wish to get in to tuning (and then maybe the realtime kit etc etc.). You would also need to install an SXR board in the pcm so that it can talk on the vehicle bus https://pcmhacking.net/forums/viewtopic.php?f=14&t=398
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396