The1's Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
Posts: 4058
Joined: Mon Jan 04, 2010 10:23 am

The1's Enhanced Factory Bins

Postby The1 » Wed Jul 04, 2012 8:39 pm

Enhanced Mod is based on existing factory code, the enhanced features are extra code or modified code integrated into the factory code.
The main goal of Enhanced Mod is to remove the limitations of the factory system for performance setups and add extra features to aide tuning.

Enhanced MOD General Information Version 1.2 READ FIRST!
Enhanced Mod General Information.pdf
(782.74 KiB) Downloaded 3437 times


MAF Plug Types
http://pcmhacking.net/forums/viewtopic. ... 310#p38129

PCMHacking Guides
http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396

Tuning Aides
Injector Multiplier Tuning.xls
(48.5 KiB) Downloaded 1044 times

MAF Tables 14 Tuning.xlsm
(62.31 KiB) Downloaded 1211 times

EOI Calculator.xls
(126.5 KiB) Downloaded 610 times


Features over factory inc Realtime Nvram Support (Read PDF for more details)

(MAF) Extended Limit of 16226hz & 510Gram/Sec
(Cylair) limit of 1650
(EEI)Extra ECU Inputs
(KAL)Knock Active Loops Monitor
(IMM)Injector Monitor Multiplier
(ASR)Adaptive Spark Retard,
(WBAFRT)Wideband Vs AFR Target
(EOI)End of Injection,
(RPM) Fuel Cut RPM Limit Unlocked


DOWNLOADS

VS V6 N/A Auto
(MAF, CYLAIR 973, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VS_V6_$51_Enhanced_v1.4e.zip
(99.28 KiB) Downloaded 335 times

VT V6 N/A Auto & Manual
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VT_V6_$A5G_Enhanced_v1.0e.zip
(120.55 KiB) Downloaded 97 times


Note VATS is Disabled on Flash Pcm's If you want vats security re-enabled you must have the PCM and BCM Relinked - Flash PCM's also require the whole bin to be flashed the first time, tuning updates thereafter can be cal only flash's
VX V6 N/A Auto Flash PCM
(MAF)
VX_V6_$BD_Enhanced_v0.9e.zip
(81.17 KiB) Downloaded 302 times

VY V6 N/A Auto Flash PCM
(MAF)
VY_V6_$060A_Enhanced_v0.9e.zip
(84.76 KiB) Downloaded 130 times



VS V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VS_V6_SC_$51_Enhanced_v1.0e.zip
(101.31 KiB) Downloaded 362 times

VT V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VT_V6_SC_$A5G_Enhanced_v1.3g.zip
(76.11 KiB) Downloaded 259 times

VX V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VX_V6_SC_$A5K_Enhanced_v1.3f.zip
(75.37 KiB) Downloaded 291 times

VY V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI, RPM)
VY_V6_SC_$07_Enhanced_v1.2g.zip
(74.4 KiB) Downloaded 147 times



VS V8 5.0L Auto PCM
(MAF)
VS_V8_$A6F_Enhanced_v0.82a.zip
(65.58 KiB) Downloaded 304 times

VT V8 5.0L Auto PCM
(MAF, EEI, KAL, IMM, ASR, WBAFRT, RPM)
VT_V8_$A6E_Enhanced_v1.00.zip
(65.4 KiB) Downloaded 238 times

Site Admin
User avatar
Posts: 5361
Joined: Sat Feb 28, 2009 8:34 pm

Re: Extended Factory Bins

Postby antus » Wed Jul 04, 2012 9:16 pm

Nice work! :thumbup: :ugeek:
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 34
Joined: Tue Aug 02, 2011 1:05 pm
Location: Melbourne

Re: Extended Factory Bins

Postby DavoF » Wed Jul 04, 2012 11:02 pm

Is it Christmas?? :punk: :thumbup:

Posts: 2342
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Extended Factory Bins

Postby VX L67 Getrag » Thu Jul 05, 2012 7:30 am

They all said it couldn't be done & not enough room to extend, your a legend!!!!!

AWESOME work The1

Site Admin
User avatar
Posts: 5361
Joined: Sat Feb 28, 2009 8:34 pm

Re: Extended Factory Bins

Postby antus » Thu Jul 05, 2012 8:28 am

Note that the air flow max is still the same, but this is a great piece of work and huge step forward. One big piece of the puzzle down! This improves the factory bins to be able to handle about 10psi (I think?).

2017 edit: This comment is so 2012 and very much no longer relevant!
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

User avatar
Posts: 4983
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

Re: Extended Factory Bins

Postby VL400 » Thu Jul 05, 2012 9:29 am

:punk: :punk: top work mate

User avatar
Posts: 4058
Joined: Mon Jan 04, 2010 10:23 am

Re: Extended Factory Bins

Postby The1 » Thu Jul 05, 2012 9:41 am

CYLAIR isn't a factor anymore really, it does what we need it to do with the existing tables, the MAF and New Spark Table will scale the fuel/spark up from generally where it runs out.

One Vehicle i did testing on was a VT with 16psi Pulley twin W2A mini coolers, ported blower and 1.8 rockers amongst other more minor mods, this was previous to testing spark, we ran a 95mm Delphi MAF, the max hz achieved was 11242hz, so there should be plenty enough room for S/C V6's in the 20+psi range with cam/headwork i would imagine, the cylair on this vehicle ran max at about 3200rpm and 160G/S on MAF. The second vehicle was remote but with standard setup and 10psi pulley and 85mm MAF it only peaks just past the stock 10082hz, so the MAF isn't a real issue, more the cylair and spark control.

I can attach the log if anyone's interested when i get home tonight.

The Spark control is made viable via using the old MAF table area, the current table you see in the first post takes up the entire area, the new MAF table takes the Free space which is normally LPG tables, so to make the new spark table go lower we would need more room, there is room in VT bins as the LPG spark is left blank, but VX VY do not have this.

I am at this stage just wanting to check/recheck things and make sure everything is 100% as it can be. The VY bins i had nearly polished last night so will be released tonight, ill then move to the VT VX.

Because of vehicle access extensive testing just isn't possible hence why i am testing/retesting everything on the bench before release and still labeling this with beta.

Also will have now in the release a ADX monitor which uses the current PROMID label, which is basicly a useless feature for someone using these bins, so i have changed it to spark control modifier, this will then show the amount of spark being applied via the extended spark table.

User avatar
Posts: 4058
Joined: Mon Jan 04, 2010 10:23 am

Re: Extended Factory Bins

Postby The1 » Thu Jul 05, 2012 9:44 am

Here's a snapshot i have on me from the 16psi vehicle, note the spikes are because the BCM is still on the bus. This was prior to spark testing.

Image

Posts: 1082
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: Extended Factory Bins

Postby yoda69 » Thu Jul 05, 2012 10:14 am

Excellent work The1!!!! Coding is something I still struggle to get my head around.
3200rpm and 160g/s on a 6 cylinder equates to 1000mgc, so basically max'd out this parameter. If used with a stroker or more boost you may start running into problems.
Yoda69

User avatar
Posts: 9501
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: Extended Factory Bins

Postby Holden202T » Thu Jul 05, 2012 2:41 pm

do you need an PCM's for testing anything ?

i'm not sure off the top of my head what i have but if you have numbers or which ones you need i might be able to help, be happy to donate one or two for the cause.

Next

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest