VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
Post Reply
User avatar
The1
Posts: 4688
Joined: Mon Jan 04, 2010 10:23 am

VS-VY Enhanced Factory Bins

Post by The1 »

Enhanced Mod is based on existing factory code, the enhanced features are extra code or modified code integrated into the factory code.
The main goal of Enhanced Mod is to remove the limitations of the factory system for performance setups and add extra features to aide tuning.

Enhanced MOD General Information Version 1.2 READ FIRST!
Enhanced Mod General Information.pdf
(782.74 KiB) Downloaded 7784 times
MAF Plug Types
http://pcmhacking.net/forums/viewtopic. ... 310#p38129

PCMHacking Guides
http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396

Tuning Aides
INJ Multi - MAF Tables - EOI Calc.zip
(169.16 KiB) Downloaded 1959 times


Features over factory inc Realtime Nvram Support (Read PDF for more details)

(MAF) Extended Limit of 16226hz & 510Gram/Sec
(Cylair) limit of 1650
(EEI)Extra ECU Inputs
(KAL)Knock Active Loops Monitor
(IMM)Injector Monitor Multiplier
(ASR)Adaptive Spark Retard,
(WBAFRT)Wideband Vs AFR Target
(EOI)End of Injection,
(RPM) Fuel Cut RPM Limit Unlocked


DOWNLOADS

VS V6 N/A Auto
(MAF, CYLAIR 973, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VS_V6_$51_Enhanced_v1.4e.zip
(99.28 KiB) Downloaded 2339 times
VT V6 N/A Auto & Manual
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VT_V6_$A5G_Enhanced_v1.0h.zip
(120.85 KiB) Downloaded 524 times
VX V6 N/A Auto Flash PCM
(MAF)
VX_V6_$BD_Enhanced_v0.9g.zip
(81.82 KiB) Downloaded 694 times
VY V6 N/A Auto Flash PCM
(MAF)
VY_V6_$060A_Enhanced_v1.1.zip
(106.57 KiB) Downloaded 24 times
There is a tutorial showing how to flash the VX/VY Flash PCMs from these bins from RKGarage here: https://www.youtube.com/watch?v=rsIQPc_oe1Y
Note VATS is Disabled on Flash Pcm's If you want vats security re-enabled you must have the PCM and BCM Relinked - Flash PCM's also require the whole bin to be flashed the first time, tuning updates thereafter can be cal only flashes.
When flashing the whole bin it is required that you let OSE Flash Tool correct the checksum. This can be turned on in the User Preferences under "Flash PCM Auto Fix Checksum" before the flash (recommended), or by allowing it to do so when prompted on completion of the flash.

VS V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VS_V6_SC_$51_Enhanced_v1.0e.zip
(101.31 KiB) Downloaded 2167 times
VT V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VT_V6_SC_$A5G_Enhanced_v1.3h.zip
(76.19 KiB) Downloaded 1154 times
VX V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI)
VX_V6_SC_$A5K_Enhanced_v1.3f.zip
(75.37 KiB) Downloaded 2160 times
VY V6 Supercharged
(MAF, CYLAIR, EEI, KAL, IMM, ASR, WBAFRT, EOI, RPM)
VY_V6_SC_$07_Enhanced_v1.2h.zip
(74.68 KiB) Downloaded 1787 times

VS V8 5.0L Auto PCM
(MAF, EEI, KAL)
VS_V8_$A6F_Enhanced_v0.90.zip
(65.4 KiB) Downloaded 1409 times
VT V8 5.0L Auto PCM
(MAF, EEI, KAL, IMM, ASR, WBAFRT, RPM)
VT_V8_$A6E_Enhanced_v1.03.zip
(66.06 KiB) Downloaded 435 times
User avatar
antus
Site Admin
Posts: 8501
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Extended Factory Bins

Post by antus »

Nice work! :thumbup: :ugeek:
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
DavoF
Posts: 34
Joined: Tue Aug 02, 2011 1:05 pm
cars: VX L67 Executive
Location: Melbourne

Re: Extended Factory Bins

Post by DavoF »

Is it Christmas?? :punk: :thumbup:
VX L67 Getrag
Posts: 2930
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Extended Factory Bins

Post by VX L67 Getrag »

They all said it couldn't be done & not enough room to extend, your a legend!!!!!

AWESOME work The1
User avatar
antus
Site Admin
Posts: 8501
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Extended Factory Bins

Post by antus »

Note that the air flow max is still the same, but this is a great piece of work and huge step forward. One big piece of the puzzle down! This improves the factory bins to be able to handle about 10psi (I think?).

2017 edit: This comment is so 2012 and very much no longer relevant!
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: Extended Factory Bins

Post by VL400 »

:punk: :punk: top work mate
User avatar
The1
Posts: 4688
Joined: Mon Jan 04, 2010 10:23 am

Re: Extended Factory Bins

Post by The1 »

CYLAIR isn't a factor anymore really, it does what we need it to do with the existing tables, the MAF and New Spark Table will scale the fuel/spark up from generally where it runs out.

One Vehicle i did testing on was a VT with 16psi Pulley twin W2A mini coolers, ported blower and 1.8 rockers amongst other more minor mods, this was previous to testing spark, we ran a 95mm Delphi MAF, the max hz achieved was 11242hz, so there should be plenty enough room for S/C V6's in the 20+psi range with cam/headwork i would imagine, the cylair on this vehicle ran max at about 3200rpm and 160G/S on MAF. The second vehicle was remote but with standard setup and 10psi pulley and 85mm MAF it only peaks just past the stock 10082hz, so the MAF isn't a real issue, more the cylair and spark control.

I can attach the log if anyone's interested when i get home tonight.

The Spark control is made viable via using the old MAF table area, the current table you see in the first post takes up the entire area, the new MAF table takes the Free space which is normally LPG tables, so to make the new spark table go lower we would need more room, there is room in VT bins as the LPG spark is left blank, but VX VY do not have this.

I am at this stage just wanting to check/recheck things and make sure everything is 100% as it can be. The VY bins i had nearly polished last night so will be released tonight, ill then move to the VT VX.

Because of vehicle access extensive testing just isn't possible hence why i am testing/retesting everything on the bench before release and still labeling this with beta.

Also will have now in the release a ADX monitor which uses the current PROMID label, which is basicly a useless feature for someone using these bins, so i have changed it to spark control modifier, this will then show the amount of spark being applied via the extended spark table.
User avatar
The1
Posts: 4688
Joined: Mon Jan 04, 2010 10:23 am

Re: Extended Factory Bins

Post by The1 »

Here's a snapshot i have on me from the 16psi vehicle, note the spikes are because the BCM is still on the bus. This was prior to spark testing.
dave.jpg
yoda69
Posts: 1220
Joined: Sun Mar 15, 2009 10:20 am
cars: 2004 VYII Acclaim Wagon V6 Auto LPG/Petrol
2004 VYII Berlina sedan V6 Auto
2005 VZ Monaro CV8 manual
Location: Geelong, VIC

Re: Extended Factory Bins

Post by yoda69 »

Excellent work The1!!!! Coding is something I still struggle to get my head around.
3200rpm and 160g/s on a 6 cylinder equates to 1000mgc, so basically max'd out this parameter. If used with a stroker or more boost you may start running into problems.
Yoda69
User avatar
Holden202T
Posts: 10354
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: Extended Factory Bins

Post by Holden202T »

do you need an PCM's for testing anything ?

i'm not sure off the top of my head what i have but if you have numbers or which ones you need i might be able to help, be happy to donate one or two for the cause.
Post Reply