Hi all,
Looking at the 14point7 SLC OEM EvK-Evaluation Kit as has been posted here before.
Link - http://14point7.com/SLC-OEM.php
Just wanting to know if I was to purchase this kit does it replace the factory o2 sensor? Or is it best to drill and weld in new o2 bung?
Thanks in advance
Fitting Wideband o2
-
300kwv6
- Posts: 80
- Joined: Wed Jan 18, 2012 5:16 am
- cars: VR V6 Stroker Turbo
BA XR6T - no more
VP V6 Vacationer - no more - Location: Perth
-
The1
- Posts: 4852
- Joined: Mon Jan 04, 2010 12:23 am
Re: Fitting Wideband o2
yes it has narrowband simulation, it does work i have this on my daily with the DIY2 kit, the most important thing you need to do if going down this route is use the best earthing as possible as this is the reference point, if it's out then closed loop fueling will not be accurate.
-
FXST02
- Posts: 107
- Joined: Thu Jul 12, 2012 10:42 am
- cars: VP V6 Auto sedan
- Location: Perth WA
Re: Fitting Wideband o2
Do all O2 sensors have the same size thread? I've a got Nissan and a VP here and they both have the same size so was just wondering.
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: Fitting Wideband o2
Not all - there are odd ones but most are the same as the ones you have.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396