VS V8 SERIES 3 CHECKSUM

[v8-tuning]

Just looking in tuner pro
and want to confirm checksum for vs series 3 v8 auto
using vs series 3 A6 v1.02 xdf it looks to be decimal point
if i type in AA it just goes to 00000's but type 127.00 it looks ok.
just want to confirm,thanks.

[v8-tuning]

Ok after changing to 127.00 and also trying AA it comes up the same
when i burn and check in tuner pro as 29741.00
is this correct? im used to the vn-vs stuff type in AA and its done this im just not sure.

[VL400]

Select the device ID item and press F2 and change the item shown here .. https://pcmhacking.net/forums/viewtopi ... its#p22852

Also, AA is 170 decimal.

[v8-tuning]

Ok i changed it and put in 170 seems ok and checked it in raw hex and its 00AA.

[VL400]

Are you changing the checksum or device ID? Device ID is what your wanting to change from A5 to AA and should be a single byte.

[v8-tuning]

Ah got it,yeah i was trying to change checksum oops.
thanks vl400.