Connecting to and tuning flash pcms?

Holden/Delco Tuning. ALDL, OBD 1.5. Circa 1989 to 2004.
Jervies
Posts: 199
Joined: Wed Nov 09, 2011 7:35 am
cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor
Location: Victoria

Connecting to and tuning flash pcms?

Post by Jervies »

I havnt seen much info around on this but i was wondering how to go about ajusting a tune on a vt flash ecu? Cheers
Top
VX L67 Getrag
Posts: 2971
Joined: Sun Aug 02, 2009 11:16 am
Location: Bayside, Melbourne, Victoria

Re: Connecting to and tuning flash pcms?

Post by VX L67 Getrag »

There's no such thing as a flash vt v6 PCM, there memcal so only if it has nvram is it flashable!

N/a vx v6 on were flashable!
Top
User avatar
antus
Site Admin
Posts: 10016
Joined: Sat Feb 28, 2009 10:34 am
cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007

Re: Connecting to and tuning flash pcms?

Post by antus »

If you are thinking of the vx/vy v6 flash pcms, then vl400s flash tool will do it over aldl. https://pcmhacking.net/forums/view ... p?f=3&t=82
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Top
Jervies
Posts: 199
Joined: Wed Nov 09, 2011 7:35 am
cars: Vt v6 wiith a gt35/40 turbo e85 399rwkw
Mazda e2000 with a cammed vx ecotec motor
Location: Victoria

Re: Connecting to and tuning flash pcms?

Post by Jervies »

Thanks.
Top

Return to “Holden ALDL ECUs”