Want to add a wide band O2 sensor, Kit suggestion?
-
- Posts: 71
- Joined: Fri Oct 12, 2012 7:01 pm
- cars: VN calais 5L
VX SS - Location: Hoppers Crossing (Victoria)
Re: Want to add a wide band O2 sensor, Kit suggestion?
Thanks for the feedback! Didn't think it looked right.
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Want to add a wide band O2 sensor, Kit suggestion?
yeah i'd be cutting it in half, get two out of it then also!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Want to add a wide band O2 sensor, Kit suggestion?
It still works ok with the long adapter. There is enough turbulence to get a correct reading.
"Definition of a Drag Racer: A person who spends money he doesn't have on parts he doesn't need to impress people he doesn't know." - Grumpy Jenkins----- Poverty---
Re: Want to add a wide band O2 sensor, Kit suggestion?
I believe the instructions say if you have a really high exhaust temp and high exhaust flow and lots of power then use the longer bung to pull hte wideband out of the hot stream into the outskirts to save it overheating and getting damaged. (or something to that effect)
-
- Posts: 71
- Joined: Fri Oct 12, 2012 7:01 pm
- cars: VN calais 5L
VX SS - Location: Hoppers Crossing (Victoria)
Re: Want to add a wide band O2 sensor, Kit suggestion?
I cut the bung in half and welded it in. I mounted the sensor just before the rear gearbox mount. Hope that's far enough away where it wont get to hot.
-
- Posts: 71
- Joined: Fri Oct 12, 2012 7:01 pm
- cars: VN calais 5L
VX SS - Location: Hoppers Crossing (Victoria)
Re: Want to add a wide band O2 sensor, Kit suggestion?
My power is not huge. Maybe 260-270kw at the flywheel.
Re: Want to add a wide band O2 sensor, Kit suggestion?
That's what I did, haven't had any problemsHolden202 wrote:yeah i'd be cutting it in half, get two out of it then also!
- antus
- Site Admin
- Posts: 8292
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Want to add a wide band O2 sensor, Kit suggestion?
Location sounds good.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 71
- Joined: Fri Oct 12, 2012 7:01 pm
- cars: VN calais 5L
VX SS - Location: Hoppers Crossing (Victoria)
Re: Want to add a wide band O2 sensor, Kit suggestion?
Hooked it all up and all works well. Haven't warmed up the engine yet but can tell it's running very rich when I first start it. 11.1 to about 12.1. Got the car half pulled apart to run the wires for the knock sensor and a/f gauge and before I put it back together I am going to add the innovate oil presure/oil temp + water temp/volts. Only problem is I cant seem to find much info on how they display both readings from the same gauge. Has anyone got these same gauges in there car?
- Holden202T
- Posts: 10330
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Want to add a wide band O2 sensor, Kit suggestion?
i thought you got the MTX-L ? it has nothing else it can display as far as i am aware!!
by the way i think you'll find the commanded AFR will be close to what your seeing on startup.
by the way i think you'll find the commanded AFR will be close to what your seeing on startup.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread