Changing a Memcal in TRX100 PCM

[damiandownie]

A little bit overboard...oh thought he was going diving with spongebob! sorry lol

[The1]

one last thing i thought id do before it goes to the real bin is peal the sticker back, yep even removed the memcal code, though serial number matches to BSTK

[The1]

I reckon the prototype board is just to make it look technical and modified inside if you start trying to peel the memcal cover off. I guess without the speedo mods on the pcb, none of these would allow for a working speedo?

only auto feeds from the pcm, manual bcm and cluster feed from input wire or sensor output

[trikky73]

man I had heard about his tunes just being copies of other peoples ones but this is just plain ripoff

[vlad01]

lol just as i thought, few year ago ( when I was a n00b at this sort of stuff) I bought one of his eproms and after installing the engine ran too hot and you could hear it ping. sounded terrible. So I complained about it and asked what he actually set in the ignition and fuel maps, he couldn't even answer that.

So yeah here is the proof in this thread. what a scum bag.

lucky i only wasted 20 buks on the eprom and not some larger amount.

[tav]

I think his ECU's are that expensive because he spends most of the $ on superglue xD

[dbrickz]

about 2 years ago i got a sv3800 memcal from this seller same deal ran hot thermo fan wouldnt start still got the memcal if some one wants to have a peep

[The1]

had a look at dbrickz TRX memcal, photocopied SV3800 sticker on a stock VP V6 memcal, still had the delco sticker intact! Read the chip to make sure and definatly so.