OSE$12P Settings for V8 Fan Control

[Chuff]

Hiya all,

I've noticed that the OSE$12PV111 BIN has a Fan Params - High speed fan ON coolant threshold (5degC hysteresis) setting to turn my fans on but no matching Fan Params - High speed fan OFF coolant threshold (5degC hysteresis) setting.

How would you determine what the BIN settings should be based on the opening value of the thermostat? For example, I have an 88 degrees Celsius thermostat installed and would like to know what settings need setting and to what values in the BIN. Could someone please advise.

Thanks.

Chuff

[Dazza92VP]

that 5degC hysteresis is the off point, so when it hits what ever temp you set it to it wont turn off till its 5 degrees under that temperature to stop it cutting in and out constantly. as for temps to cut it in at most people set it to around 95deg. i think the v6 commos are at 98 standard if i remeber

[festy]

I imagine you'd want the "off" point to be above your thermostat opening point - so if you have an 88* thermostat then the fan ON should be at least 94*