VATS stops fuel being injected, it is also meant to disable the starter after a delay.
yes you are correct, if there is an error with the memcal the fans will come on when you turn the ignition on.
VT not starting after VATS disabled
-
charlay86
- Posts: 586
- Joined: Thu Sep 17, 2009 4:00 am
- cars: VT S1 SS (L67)
- Location: Perth, WA
-
antus
- Site Admin
- Posts: 10016
- Joined: Sat Feb 28, 2009 10:34 am
- cars: TX Gemini 2L Twincam 8psi
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Subaru WRX 2007
Re: VT not starting after VATS disabled
well if nothing is livening up the ignition circuit (I take it the key switch isnt motorised and turning), then thats why. Your cranking but not 'on' and half the car isnt powered.
PS one of the funnyest things ive seen was someone with a remote start alarm, demoing the new unit and forgetting their car was in gear. Car, meet pole.
PS one of the funnyest things ive seen was someone with a remote start alarm, demoing the new unit and forgetting their car was in gear. Car, meet pole.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
VT1GER
- Posts: 34
- Joined: Mon Feb 18, 2013 9:34 am
- cars: Holden VT stroker, cammed, blown.
Re: VT not starting after VATS disabled
^ they must of fitted it wrong, all remote start alarms have a safety shutdown system. (im a audio/acc fitter) 
Well my fans are coming on straight away with both of the new memcals. So there is something happening with the memcals. Emailed the guy i bought it off and im sending both back so he can check them out. Third time lucky? lol
Well my fans are coming on straight away with both of the new memcals. So there is something happening with the memcals. Emailed the guy i bought it off and im sending both back so he can check them out. Third time lucky? lol