i was thinking of using a 16234531 pcm that i have here which is vs series III 5l for my wb tonner once ive got it running and i cut the wiring down to basic needed components but i thought what if some one wanted sequential on a conversion and i came up with the attached obviously its pretty much the same but using:
injector 1 as injector 1
injector 2 as injector 6
injector 3 as injector 7
injector 4 as injector 4
use 4 cyl dizzy with 8 tooth copper wheel
build cam sensor chopper wheel find hall effect sensor to suit
mask DTCs if possible for
vats off
knock sensor
l/h or r/h o2 sensor error
A/F ratio variation between banks
and probably injector power supply monitor
tune memcal to suit
its just curiosity and im bored
also thought it would fix peoples problems with not being able to use their vss if they have a hall effect or reluctor type seeing as this pcm can do both as ive read
sequential injection maf based 4cyl
sequential injection maf based 4cyl
- Attachments
-
- 4cyl maf based wiring diagram.jpg (257.08 KiB) Viewed 3999 times
-
- Posts: 1
- Joined: Tue Apr 23, 2013 7:39 pm
- cars: opel corsa c 1.3 cdti -z13dt- 2006
Re: sequential injection maf based 4cyl
It's nice.I will post later.
Thanks for now
Thanks for now