tuner pro

[vsv696]

hi all

i dwn loaded tuner pro and when trying to configure cable there is no data acq/emulation tab, so i dwn loaded tuner pro rt and when trying to configure cable i only get a selection of com 1,3 or 10 when its on com 6 so i go back into device manger and configure cable for com 3. when i go back into tuner pro and try to set it for com 3 it only gives me a selection of com1 or 10. can someone pls help.

thanx

[antus]

It sounds like the USB->serial drivers are broken. You should see all ports that are available and working in the list, and should not try and move them around. Without knowing what type of cable you have, try and see if newer drivers are available from the manufacturer.

[vsv696]

This is the interface I have that I got off a friend. He got it off ebay.
The driver im using is from the ftdi site. Do u suggest I get an interface off u guys?

[Holden202T]

you don't necessarily need to get an interface from here but we also can't really trouble shoot what we don't know ....

[Jayme]

make sure you downloaded the VCP driver from ftdi, the other one doesnt give you the virtual com port.

[VL400]

Can also try the flashtool (https://pcmhacking.net/forums/view ... p?f=3&t=82), see if it can list and use the port.

[antus]

Thanks for sending the pic of the guts.

pic2.jpg

Its a home made interface with a pic processor, so that probably means its some kind of ELM compatible device (or similar) and designed for logging some other protocol. You might need another interface.

[VL400]

Looks like its using pin 9 which is ALDL, but would likely need to contact the seller and get drivers for it if windows is not detecting it properly.