My Delcoed Rides

Post Your Delco Powered Ride Here
User avatar
delcowizzid
Posts: 5631
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: My Delcoed Rides

Post by delcowizzid »

every 10th in the 60' is 2 tenths at the other end its going to go seriously quick :D
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My Delcoed Rides

Post by Holden202T »

yeah well the only real difference in my quickest run and the others was the .1 quicker 60 plus probably the tranny being at its best, i looked at my second run (13psi) and it was still even dodgy there. the 2-3 shift in the 11.29 pass was definately really good compared to the others.
User avatar
delcowizzid
Posts: 5631
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: My Delcoed Rides

Post by delcowizzid »

watch out for using the wastegate adjuster screw too mate.they are a ratshit design and by the time you have wound up the boost enough the gate doesnt open as far anymore and you end up not being able to get rid of enough exhaust i dont know why they even fit an adjuster must be a selling point LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My Delcoed Rides

Post by Holden202T »

i think i've got a pretty big gate for what i need so its probably not fully open anyways!
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My Delcoed Rides

Post by Holden202T »

finally got my hands on the outside the car vids :) heres the 11.29 @ 123MPH pass.

[youtube]http://www.youtube.com/watch?v=YF2ul9TNHfg[/youtube]
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: My Delcoed Rides

Post by Jayme »

great run! poor car in the other lane wouldnt have known what hit him :D
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My Delcoed Rides

Post by Holden202T »

for anyone that's interested, I finally got the time slips scanned!
time slips 1.jpg
time slips 1.jpg (78.68 KiB) Viewed 4229 times
time slips 2.jpg
time slips 2.jpg (74.22 KiB) Viewed 4229 times
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My Delcoed Rides

Post by Holden202T »

Well some good progress in the shed :)

Got the high energy clutch friction plates for it, also got the 3rd gear piston machined to fit the 6 frictions in!!! So everything is coming together nicely :)
User avatar
Holden202T
Posts: 10394
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: My Delcoed Rides

Post by Holden202T »

ok finally got the videos my mates brother took from the stands .... unfortunately he didn't get my last two runs (the 11.29 was one of them :( ) but never the less, good videos :)

this is my first run, where I had the issue with 2nd gear or the shifter whatever it was, its at about half track and you can see the other car passes me after it then I start to catch back up.

[youtube]http://www.youtube.com/watch?v=IhOGFkSmBpI[/youtube]

and this is my second pass, was still on 13psi as above, but no tranny gear change issues!

[youtube]http://www.youtube.com/watch?v=LfipPN8KSYs[/youtube]
User avatar
charlay86
Posts: 584
Joined: Thu Sep 17, 2009 2:00 pm
cars: VT S1 SS (L67)
Location: Perth, WA

Re: My Delcoed Rides

Post by charlay86 »

Love the commentary :lol: "It's a small one... it's a mini one."
Post Reply