VR auto to manual conversion.

A place For General Chit Chat Etc
User avatar
vlad01
Posts: 8124
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: VR auto to manual conversion.

Post by vlad01 »

I figured they are Siemens deka. I had seen close up pick of them before somewhere and they say deka on the side near the o rig at the top so they should be good. I'll see if I can find the PN.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
antus
Site Admin
Posts: 9034
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VR auto to manual conversion.

Post by antus »

Nah, they're not dekas. Dekas are advertised as such. They do say Siemens, but are probably close to or exactly stock flow rate.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
vlad01
Posts: 8124
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: VR auto to manual conversion.

Post by vlad01 »

http://www.ebay.com.au/itm/SIEMENS-VDO- ... 0725211953

this one does, have a look at the close up pic.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
User avatar
antus
Site Admin
Posts: 9034
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VR auto to manual conversion.

Post by antus »

ahh i see. i didnt realise the small ones were dekas too. i still wouldnt trust an ebay pic. Personally i'd ask the seller for a part number then go from there. A bit of ebay skepticism might save you.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
vlad01
Posts: 8124
Joined: Mon Oct 08, 2012 6:41 pm
cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive
Location: Kyneton, Vic

Re: VR auto to manual conversion.

Post by vlad01 »

read my mind, already did sent a message for PN. I checked the VDO site and they do make replacement injectors although they do not provide info about the replacement part range, performance injectors they do.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Post Reply