$5B ecu file convert ok to XDF?

[VX L67 Getrag]

I'm just making sure the $5B ecu file converts ok to XDF?

I'm trying to use it on the VS V8 BMZN bin & supposedly the VATS disable is at bit 0 location 000C, has anyone tested that & know it works as I'm still getting reported limp home mode?

[VL400]

Make sure to set the program ID to AA, TP cant handle the checksum.

[VX L67 Getrag]

yeah done that too, I think antus did fix the checksum issue with his plugin, but I didn't edit the bin, but can confirm the tuner did!

So the vats area does look correct?

[VL400]

Was thinking this was for an auto, but TP can handle the manual VS bins - if the XDF is setup for it.

0x000C bit 0 should be VATS disable.

[VX L67 Getrag]

Cool thanks heaps for that!

[VX L67 Getrag]

Just found out why the tuner may be having the issue there using it in an 808 for a VN, that would more than likely cause limp mode wouldn't it?

I wouldn't have thought a VS tune would work in a VN?

[delcowizzid]

should work fine whats the issue wont run at all and in limp mode.try a BKBK vr tune with no vats and see if it works or just tune 12p v8 tune to suit

[jca]

Hi does any one have a copy of the vr gts manual bin so I could try disable the vats and using that one vx l67 getrag has been helping me on this one it runs but is in limp in the vn v8 I ve been testing it in with the vs manual ECM I don't have the other car handy

[delcowizzid]

BKBK0140 VR V8 348 INCH STROKER MANUAL 16183082 ECM.zip

[VX L67 Getrag]

That bin is definition $3C does anyone have an XDF for it or know what it's similar to for looking for data that their is an xdf for?