DELCO NIGHTMARE..... :(

[VL400]

If you have a Kalmaker SP2 or SP3 RT ECU you can use TunerPro to edit it yourself using the XDF here .. http://pcmhacking.net/forums/viewtopic.php?f=7&t=5

The flashtool can read and write it.

If its an EPROM will need to read it in a programmer, edit it in TunerPro, erase and then reburn the memcal.

[Dylan]

Thanks 202.

Does anybody have the Kalmaker software that they can update my limiter?

Thanks
Daniel

I have street pro 3 with working laptop im wanting to sell. Is it a Kalmsker real time ecu?

[Vpgts076]

If you have a Kalmaker SP2 or SP3 RT ECU you can use TunerPro to edit it yourself using the XDF here .. http://pcmhacking.net/forums/viewtopic.php?f=7&t=5

The flashtool can read and write it.

If its an EPROM will need to read it in a programmer, edit it in TunerPro, erase and then reburn the memcal.

It is a memcal only.

So reading the above Kalmaker doesn't have a security feature locking the memcal?

Reason I ask is spoke to a tuner and he claims he needs to retune car from scratch due to the security PAL???

$1200 later for just a limiter change......

Thanks
Daniel

[Dylan]

There is a security feature on the chip from Kalmaker. Not sure how to go about reafing them sorry.

[VL400]

Reason I ask is spoke to a tuner and he claims he needs to retune car from scratch due to the security PAL???

$1200 later for just a limiter change......

You can make changes without a full retune.

[antus]

yeah, you can read/write/edit them, the security chip just needs to be present for the engine to start. I can do it for you if you can post me the memcal. I'll send you a pm.